Around the coil. I believe many people know this method. Buy some cord to wrap around the inside of the ring. Silver rings can use gray lines, and gold rings can use red lines. Pay attention to the thickness when winding the coil, which can fill the gap between the finger and the ring. Record it.

Find a professional repair, and the ring can be taken directly to the store to change its size. Professional jewelry stores usually use gold cutting method to cut off a part of the ring, and then weld and polish it to reduce the size of the ring.

If you just bought it, you can negotiate with the seller to change a size. If you can't change it, it's good to wear it as a necklace. Some time ago, my friend gave me a ring of Emerald Lu. It looks good, but it's a little big. I just wear it as a necklace.

What should I do if I buy a big jade bracelet? I bought a big jade bracelet to wear. What should I do?

The jade bracelet is too big to wear, which can be solved by adjusting the size. Generally speaking, the size of jade bracelets can be adjusted in two ways. One is to cut a small hole in the bracelet and install a metal base to make it smaller. The other is to cut a few small holes in the bracelet and subtract the jade material to make it smaller.

If the ring of the jade bracelet you buy is relatively large, you can choose your favorite rope to wrap around the bracelet to narrow the gap between the bracelet and your wrist. You can also wear something on your wrist, such as sleeves and wristbands, to increase the thickness of your wrist. You can also increase the wrist circumference by increasing the weight to prevent the bracelet from falling off.

Winding method Whether it is a jade bracelet or a gold bracelet or a ring, you can try winding method. You can choose your favorite rope to wrap around the bracelet. If everyone is ingenious and weaves beautiful knots, that's good.

Can only be replaced. Jade bracelets cannot shrink. After the ordinary jade bracelet is made, the size is fixed and cannot be changed. Therefore, it is very important to say whether the size of the jade bracelet is appropriate. A jade bracelet of just the right size is comfortable and safe to wear on your hand.

When the ring of the jade bracelet is large, you can choose your favorite rope to wrap around the bracelet, which can shorten the distance between the bracelet and the wrist and reduce the volume of the bracelet.

Can you make the ring smaller when it is big?

Diamond ring: depending on the style, the setting is the most complicated. If it is only a larger size, most of the repair and processing points can still be changed. Xinyu herself has learned to change rings, which is not nonsense. If there are too many rings, forcibly changing rings will easily lead to the danger of diamonds falling off. It is recommended to exchange gold for money.

When the ring is big, it can be sent to a professional jewelry store or luxury maintenance agency for replacement. There are many ways to change the size of the ring.

The ring can shrink if it is big. When you find that the ring doesn't fit, it's a pity to lose it. It will take time and money to buy it again. Then, in fact, if the diamond ring doesn't fit, you can modify the ring. But try not to change it if possible.

The washer is a circular part, made of the same material as the original ring fixer and placed in the ring; Cutting gold is the process of cutting off a part of metal and then welding. The cut metal can be returned to you, or as a maintenance credit, so don't worry too much. Can the diamond ring be made smaller when it is big? Diamond rings can be made smaller.

Looks generous. The store has been resized. The insurance method is to take it directly to the store to change the size. Most specialty stores can provide after-sales service to restore the ring to its normal size. Note: If your ring is expensive, please try to choose a professional shop to modify the size to avoid loss.

What if the emerald ring is too big?

Winding method: This is a traditional method commonly used by the older generation.

When the ring is large, a soft string can be wrapped around the outer ring of the ring, which can increase the thickness of the ring and play a reinforcing role. Pay attention to the thickness when winding the coil, which can fill the gap between the finger and the ring.

Winding method: choose your favorite rope, just wind a section on the bottom side of the ring, and the bottom will not be visible, but because the winding rope shortens the diameter of the ring, the ring can also be firmly worn on our hands and generally will not fall off easily.

Find a professional repair, and the ring can be taken directly to the store to change its size. Professional jewelry stores usually use gold cutting method to cut off a part of the ring, and then weld and polish it to reduce the size of the ring.

If you just bought it, you can negotiate with the seller to change a size. If you can't change it, it's good to wear it as a necklace. Some time ago, my friend gave me a ring of Emerald Lu. It looks good, but it's a little big. I just wear it as a necklace.

When the ring is big, it can be shrunk by washer, gold cutting and winding. Washer Washer is a simple way to replace the ring, but it is only suitable for small rings. The process is to make a washer with the same color as the original ring holder and then put it on the inner ring of the ring.

The emerald ring is too big, but I like it very much. How to make it smaller? thank you ...

1, adhesive tape, plastic wrap method. Cut off the tape as wide as the ring and stick it on the inside of the ring. If you are worried that the tape will leave traces after being torn off for a long time, try wrapping it with plastic wrap, and the effect is the same.

2, platinum rings: especially some car pattern rings, because of the surface texture of the ring, changing the ring will destroy the overall design of the ring, so you can't change the ring. The ring is too big and can only be exchanged or sold.

3. Go to the store we bought to enlarge the ring. This method can only be used for rings with simple styles and forms.

4. If the ring is big and wants to be smaller, you can shrink the ring by the washer method. The washer method is to use a heavy metal of the same material to make a washer embedded in the inner wall of the ring, which not only reduces the size of the ring but also does not damage it. Even if the finger becomes thicker in the future, it can be worn without the washer.

5, 2 tape method When you encounter a big ring with a favorite style, you can cut a transparent tape that is almost as wide as the ring and stick the tape inside the ring; Some people will use plastic wrap instead of tape, and the effect is the same. This can solve the problem without affecting the beauty of the ring.