1. Rope threading: Fold the rope in half, pass through the hole in the middle of the jade pendant and fix the rope. Fold the jade necklace rope in half to find the middle part, fold the rope in half and pass through the middle part, and fix the beads in the middle part of the hanging rope. Note that the beads should not be too big or too small when choosing, subject to the fact that the double rope just passes through.

2. Prepare tools, such as scissors, lighters, lanyards, etc. After the tools are ready, we can start. The specific operation is as follows: burn the ends of the two ropes on the rope with a torch, pinch the ropes together while they are hot, smooth them and let them pass through the hole of the jade pendant.

This jade pendant can be tied with a knot. Loosen the perforation on the rope of the jade pendant, pass the rope through the pendant from one direction, then cross the ropes on both sides, pass through the small holes in the rope, and then leave a gap, and then pull the rope from the left rope to the right rope according to the double knot method.

4. Perforation: Twist the rope end into a thin thread and thread it into the hole of the jade pendant. You can pull the rope out with pliers and tweezers. Light one end of the rope with a lighter, and then rub the rope end into a thin thread.

Roast the rope on the fire, pinch it while it is hot, and let the rope pass through the hole. Both ends of the rope pass through the hole of the hook together. According to personal preference, set aside a binding length of appropriate length, such as 1cm.

6. Roast the rope on the fire, pinch it while it is hot, and let the rope pass through the hole. Both ends of the rope pass through the hole of the hook together. According to personal preference, set aside a binding length of appropriate length, such as 1cm.