After three or five years of use, the floor can be repainted with the same paint as before. Before painting, in addition to dust and scale removal, we should also use fine water mill sandpaper and dip it in warm water to gently polish the board surface to remove residual oil stains and paint particles left by the last painting.

2. Anti-fouling

You can wax the floor every two or three months. Before waxing, dust and scale should be removed, and then a clean lint-free soft rag should be dipped in wax, starting from one side of the wooden floor, and circular wiping should be done on the wooden floor in turn.

3. Thermal protection

If the heating leaks and the wooden floor accumulates water, it must be cleaned in time. It is not allowed to directly expose to the sun or bake with an electric stove to avoid drying too fast and cracking the floor. Solid wood floors should not be used for a long time, and should not be covered with plastic sheets or newspapers, because the paint film will become sticky and lose its luster after a long time. At the same time, it is forbidden to put hot water kettle, hot rice cooker and other things directly on the floor to avoid scalding the paint film.

scrub

In daily cleaning, you can use a vacuum cleaner first, and then dip a soft cloth in a special cleaner or soap sheet diluent for cleaning. For large-area cleaning, a sprayer or a rotary cleaning machine can be used. For natural lacquer solid wood flooring, water is not good for it. Minimize excess water when cleaning, and wring the rag dry when scrubbing.

Extended data:

Matters needing attention in the use of solid wood flooring:

1, some sharp feet, especially heavy objects, are forbidden to be placed directly on the surface of the wooden floor, so as not to scratch and damage the surface of the wooden floor and shorten its life. When placing heavy objects, try to put them aside, because this will allow the other floor to move freely and will not cause the floor to arch. It also needs to be covered with pads for protection.

2. Always keep the floor clean and tidy, and it is best to have no dust (such as fine sand and hours). Therefore, you should always use a vacuum cleaner to absorb garbage to avoid scratches caused by hard particles on the board when shoes move.

3. Do not accept corrosive liquids, strongly acidic and alkaline substances, such as toilet cleaners and kitchen degreasing agents. It is forbidden to put high-temperature liquid or objects directly on the surface of wooden floor to avoid damaging the surface. Of course, remember to clean up the spilled medicine in time.

4. When cleaning with a wet rag, remember that the humidity should not be too high, so as to avoid moisture hiding from the gap and increase the humidity of the wooden floor.

5, where the sun shines, avoid exposure as much as possible, follow the exposure for a long time, avoid overheating or accelerate the oxidation reaction. Let the fan be a heater, and the heater placed directly on the ground is also a wooden floor. Remember to use it less or at a suitable distance.

References:

People's Network Solid Wood Floor Maintenance Four Tips to Teach You a Brand-New Look?