Presumably, everyone is familiar with track lights. Track lights are mainly spotlights, which play a certain decorative role through track installation, mainly to highlight the items under the lights. Therefore, it is very common in various clothing stores, jewelry stores and high-end clubs. Of course, it is also widely used at home. Track lights are often installed in combination with the ceiling, but the wiring is also different due to different ceiling materials. So what is the installation method of track spotlight wiring? Let's take a look with Qijia. Com experts.

1. What is the installation method of track spotlight wiring?

The key to the wiring installation of track spotlights is the series power cable. It is necessary to install a junction box at intervals, open a small hole in the junction box, and lead the power cable into the ceiling, which has good concealment. Then you need to connect the transformer and separate the four wires on the transformer. The two wires on the front are connected to the lights on both sides, and the two wires at the end are connected to the power cord.

Second, how to install the track light

1, preparation before installation

The first step in installing the track light is to disconnect the power supply, which is the premise of safe installation. Then, you need to prepare all the accessories to be installed, including lamps, hardware, power cables, transformers, etc. The main parts and accessories are required to be complete, and there must be no less installation tools, such as screwdrivers.

2. Install the transformer

Transformer is an important part in the installation of track lamp. Generally, track lights are equipped with transformers, because once the lights exceed 12V, they must be in accordance with the transformers. If it is not equipped, you must buy it yourself, so as to ensure the safety of electricity use.

Step 3 Install track lights

Finally, according to the track of the track lamp, it needs to be fixed on the ceiling and a junction box needs to be fixed at a certain distance, so that the track lamp can be better connected and fixed on the track. When installing lamps and lanterns, you can use hoops, bolts, etc. And need to adjust its irradiation angle and direction.

Editor's summary: The above is the introduction of the installation method of track spotlight wiring. I hope what Bian Xiao shared can give you some reference. If you want to know more, you can pay attention to our family. Com for consultation.