1. So wearing it for a long time will only make the finished jade look shiny.

2. If the ice jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite at ordinary times, or go to a professional shop to polish the jadeite to make it look more delicate and shiny.

3. Although generally speaking, thick-bottomed jadeite will not be used to make rings, in fact, some pendants, sculptures and carvings with low requirements can be made of thick-bottomed jadeite, but the quality of this jadeite is not as good as that with many details.

4. There is a big gap. With the continuous penetration of sweat sebum, it reacts subtly with the crystals inside jade, resulting in some changes in the softness of jade. The visual effect brought by the change is good or bad and uncontrollable. However, the crystal becomes fine from coarse to fine, and the water head changes from poor to good. There is no such qualitative change.

5. Jade bracelets are not conducive to growing water. Through long-term wearing, with the continuous wearing time and the infiltration of sweat and sebum, the moisture can be slightly improved and the dirty spots cannot be removed.

How can the jade bracelet become exquisite when the meat is rough?

1. If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

2, appropriate hydration. The maintenance of jade bracelets also needs proper hydration. Jade bracelets will lose some moisture after being worn or placed for a long time. Under normal circumstances, jade bracelets can be properly soaked in clear water for a period of time to replenish water, and jade bracelets can also maintain moist luster. Keep wearing it.

3. You can't make it thinner when you wear it. If you just bought it, you can go to the store and change it into a suitable bracelet and a smaller ring. If the sliver is too thick, you can go to the jade processing point and re-polish it, so that the sliver can be thinned by overall polishing. However, this change is irreversible and has certain risks, which should be carefully considered.

4. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply the toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

What about jade meat?

1. If the ice seed jade is rough, you can improve the appearance of its coarse meat by wearing more jade in peacetime, or go to a professional shop to polish the jade to make it look more delicate and shiny. However, these practices cannot fundamentally change the essence of ice jade meat.

2. The roughness of jadeite meat has an important influence on the final product. The jadeite products with too thick jadeite meat, which represent the quality of tender species, are of low value in the market. It's not good to make bracelets with jadeite stone. Too thick meat means tender, and jade bracelets of this quality are of low value in the market.

It is appropriate to do some carving and engraving on the bottom of jade. The so-called coarse foundation means that the particles that make up jadeite are large or uneven in size, which is similar to what we call coarse seed difference.

4. Then polish with polishing sandpaper. Finally, it can be finished by polishing with cloth. If the ice seed jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite in peacetime, or go to a professional shop to polish the jadeite to make it look more delicate and shiny.

How to improve the jade ring when it is big?

Find a professional repair, and the ring can be taken directly to the store to change its size. Professional jewelry stores usually use gold cutting method to cut off a part of the ring, and then weld and polish it to reduce the size of the ring.

Winding method: This is a traditional method commonly used by the older generation.

Winding method: choose your favorite rope, just wind a section on the bottom side of the ring, and the bottom will not be visible, but because the winding rope shortens the diameter of the ring, the ring can also be firmly worn on our hands and generally will not fall off easily.

When the ring is large, a soft string can be wrapped around the outer ring of the ring, which can increase the thickness of the ring and play a reinforcing role. Pay attention to the thickness when winding the coil, which can fill the gap between the finger and the ring.

If you just bought it, you can negotiate with the seller to change a size. If you can't change it, it's good to wear it as a necklace. Some time ago, my friend gave me a ring of Emerald Lu. It looks good, but it's a little big. I just wear it as a necklace.

The method of jadeite bracelet blank How to make jadeite bracelet blank?

1. If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

2. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

3. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping. Put the carved jade into the drum with a grindstone.

4. Minimalist polishing method. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

How can jadeite become thinner? How can jadeite become thinner?

If the ice seed jadeite is rough, you can improve the appearance of its coarse meat by wearing more jadeite in peacetime, or go to a professional shop to polish the jadeite to make it look more delicate and shiny. However, these practices cannot fundamentally change the essence of ice jade meat.

The jade bracelet has a rough surface and can be polished by a professional jewelry store. Put the carved jadeite into a roller with grindstone for rough polishing. Generally, the polishing steps of jade bracelets include rough polishing with rollers, thread trimming, smooth surface trimming and shaping.

You can't lose weight in it. If you just bought it, you can go to the store and exchange it for a bracelet with a smaller ring. If the sliver is too thick, you can go to the jade processing point and re-polish it, so that the sliver can be thinned by overall polishing. However, this change is irreversible and has certain risks, which should be carefully considered.