how to disassemble the rearview mirror of corolla (check the transaction price | vehicle model details): firstly, you need to disassemble the rear cover of the rearview mirror from the door, because the control circuit of the rearview mirror is in the door panel, so you can only disassemble the door panel of the door, then disassemble the connector of the wiring harness, unscrew the fixing screw of the rearview mirror, and remove the rearview mirror. This is the same order when installing.

when parking, try to manually fold the rearview mirror by yourself on the side near the roadside to prevent someone from touching the rearview mirror, and it will be troublesome if it is damaged. It should be noted that you should not poke the lens of the rearview mirror at will, which will cause the lens to shake for a long time and cause fatigue to the driver's eyes.

1. press the upper side of the mirror to expose the gap below.

2. use a flat screwdriver to reach into the gap of the buckle.

3. slowly pry the lower two buckle positions with force.

4. if there is heating, unplug the heating thread and put the base straight.

5. heating is not divided into negative electrodes, just plug in two wires.

6. first hook the two hooks on the top to the corresponding positions, press the mirror with your palm, press the upper clip into the card holder, twist around and adjust normally.

(photo/text/photo: Zeng Caihong) @219