Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - How to use the terminal crimping pliers?
How to use the terminal crimping pliers?
When wiring, many electricians will carry clamps with them, which are mainly used for wiring. For example, some terminals are relatively small and need to be connected with clamps. What should I do specifically? What aspects should we pay attention to when operating? Today, I will focus on the related knowledge of wire pressing pliers.

First, how to use the terminal wire pressing pliers

1. First, you need to put the spring terminal on the wire clamp, and then clamp it on the pliers, but be careful not to clamp it.

2. After the spring leaf is put on, leave a piece at the other end, and then prepare a piece of steel wire, which should be peeled off, but not too thick, otherwise it will affect the use effect.

3. Insert the wire into the prepared spring leaf, and be careful not to insert it too deeply, otherwise it will also affect the use effect.

4. After crimping, the terminal should only have copper wire, and do not touch the insulation skin. Take out the wire pressing pliers and see the result of wire pressing. After that, just wrap the metal belt. Be careful not to press it too tightly, which will damage the wire pressing pliers.

Second, the types of wire pressing pliers

There are many kinds of wire pressing pliers, including 3 15 original wire pressing pliers, 3 18 wire pressing pliers, Opel 3 18 and Opel 3 1 1, and Sambo 500,330 and Sambo 2 182 wire pressing pliers. , and the scope of application is relatively wide. When connecting wires or network cables, it's impossible without wire pressing pliers. When purchasing, you should also choose the appropriate wire pressing pliers model according to your own needs.

Third, other types.

According to the purpose, there are wire pressing pliers, wire pressing pliers, wire breaking pliers, wire pulling pliers and so on. These are common tools for wiring, with different functions.

1. If it is a wire clamp or a wire clamp, it is generally a tool for pressing wires or network wires.

2. Thread clippers are pliers used for thread cutting. The hardness is relatively high, and the toughness is also relatively good, so that materials with relatively low hardness can be cut.

3. Wire pressing pliers, also a common tool for electricians, can be used to connect wires by cold pressing.

4, stripping pliers, this is a common tool, mainly used to strip the insulation of the thread end.

Bian Xiao concluded: Wire crimper is a necessity for power connection. If you have a wire clamp at home, it will play a great role in wiring.