Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - Where is the cylindrical steel formwork?
Where is the cylindrical steel formwork?
Cylindrical steel formwork can be purchased from online or offline regular manufacturers.

Cylindrical steel formwork is a kind of steel formwork that shapes cement into cylindrical style, which can be purchased online or offline by professional manufacturers. The process of using cylindrical steel formwork to make columns is very simple. It is only necessary to make corresponding formwork according to the real needs of customers, and then transport the formwork to the construction site for on-site pouring to make columns.

Cylindrical steel formwork is a kind of cylindrical steel formwork which appears in the form of two butted pieces. The size of this template is relatively large. In order to ensure the use of the template, a steel plate is welded on the edge of two steel plates, which has a high welding density and can ensure that it will not fall off after long-term use.

Matters needing attention in using cylindrical steel formwork

1, the installation and removal of cylindrical steel formwork must be based on the construction site skill plan and strictly implemented.

2. When installing and dismantling the composite wood formwork, when the working height is 2m or above, the relevant regulations for working at heights shall be observed, and safety articles shall be worn.

3. The power cord of temporary lighting and mechanical and electrical equipment for construction shall be well insulated and shall not be directly erected on the cylindrical formwork. Insulating brackets shall be used to separate the wires from the combined circular formwork, and wire insulation shall be strictly avoided.

4, installation and removal of cylindrical template, height of 3m and below, can use horse stool operation, height of 3m and above, should set up scaffolding or operation channel, and set up protective railings or safety net.

5. The reserved holes of cylindrical formwork and elevator wellhead shall be covered with protective railings.

6. When many people operate or carry combined circular formwork together, they should cooperate closely, coordinate with each other and take care of each other. When working high above the ground, pay attention, do not make trouble, and do not work after drinking.