Pacific Automotive Network 1. Tool repair: Use a lever repair tool to pry up the dented area, and then use a leveling pen to flatten it point by point. To sum up, repeatedly pry up and knock flat until the dented part of the car body is restored. The characteristic of lever repair is that the repair effect is good, and it can even line up the original car's orange peel pattern (depending on the technician's skills); 2. Pull-out repair, use a pull-out repair tool to pull up the dented area, and then use a leveling pen point by point Knock flat. To sum up, repeatedly pry up and knock flat until the dented part of the car body is restored.

Car dent repair technology can repair more than 90% of the dents in the car body that have not damaged the paint. If the dents occur at the edges of the car body, it is generally difficult to repair. There are three main ways to deal with it.

1. Purely manual processing. The entire process will not cause any damage to the car paint, and the dents in the car body can be restored without the need for sheet metal spray painting.

2. Machine processing is to use a car denting machine to suck out the dented part, and then use a rubber hammer to knock it back. However, this equipment is only suitable for repairing gentle dents on the plane of the car body. Severe dents will ultimately have to be processed by hand.

3. The above two methods are only suitable for repairing dents where the car paint is not damaged. Once the car paint is damaged, or the dents cannot be repaired by the above two methods, this traditional method can only be used. Sheet metal spray paint repair.