Specifications of LED panel lights:

In fact, in addition to rectangles and circles, the common shape specifications of LED panel lights are square, and the shape of the LED panel lights below is 300mm*300mm Square, with a rated power of 10W and a luminous flux of 650lm, it is an energy-saving material lighting. The divergent light colors are mostly white, warm white, cold white suitable for installation in a separate room, such as a study, office, etc.

Since the hotel is one of the areas with the longest lighting time and the most decorative lighting, the following LED panel lights are often used in the corridors of the hotel. The shape of this flat light is also rectangular. , size is 300mm, *600mm rated power is 20W, the light is warmer white or warmer yellow, and its service life is longer than general lighting.

Lighting installation is divided into three categories: inlay, ceiling installation and suspension. Next I want to introduce the last type of LED panel light, which is also very popular, square die-cast aluminum LED panel light, this specification It is 170mm*170mm, the opening specification is 155mm*155mm during installation, and the 12W luminous flux is 780lm. It is the most commonly used suspended LED panel light in restaurants or public facilities.

In the design of flat panel lights, there are many specifications and shapes. The following is an extruded aluminum LED panel light. It is a rectangular lighting with a specification of 600mm*1200mm. This specification is the most widely used in factories. For lighting, the power is about 80W, the luminous flux is 5200lm, the power supply is large and the light intensity is wide.

In the kitchen at home, everyone will use small round lighting to decorate. This LED panel light is based on a simple and warm design. In small kitchen decoration, its size is usually 150mm in diameter, and it is installed The opening diameter is 132mm, the weight is about 230g, the light is bright and will not hurt the eyes.