When our vehicle is scraped, we can first observe the damage range by ourselves. Minor abrasions do not require cosmetic surgery. Usually just polish it. If the damage has reached the point of deformation, it needs to be repaired in the store.

Notify the insurance company to investigate and determine the damage.

After the vehicle is scraped, we need to call the insurance company, which is our own vehicle insurance company. After that, the insurance adjuster will conduct on-site survey and take photos of the appearance. This process is quite fast. It should be noted that everyone must protect the scene.

Go to the auto repair shop for maintenance.

After the automobile maintenance technician enters the store, he will judge the maintenance plan for the automobile in the shortest time. And the approximate time, if the vehicle has friction deformation, it is necessary to carry out sheet metal operation and shaping first to flatten the damaged board surface, which is the first working procedure.

Turn to the putty coating process.

Vehicles with good appearance will drive to the place where putty is scraped, and the professional putty scraping master will polish the putty, then dry the putty and smooth it with sandpaper.

Primer spraying technology.

After the putty is scraped, it should be smooth and flat by hand, and then the primer needs to be sprayed. After the primer is sprayed, you need to wait for a period of time, and then use fine sandpaper to grind off the points on the primer with water to make the paint surface smooth and flat without holes.

Prepare to spray vehicle exterior paint.

The next step is to spray the exterior paint of the vehicle, in which the paint mixing technician will adjust the color of the original paint, and the painting technician will enter the special painting room to spray the exterior paint of the vehicle. The baking time is generally about 15 minutes.

seven

Polishing, waxing, car washing.

Finally, the polished vehicle will be polished by a polishing technician, then coated with body wax, and then the vehicle will be cleaned. In this way, the scrapped vehicles will be disposed of, and the general vehicles will be out of sight after being repaired. Unless the technician's level is limited, the original car effect can be achieved.