1. Preparation: Place the precision servo electronic press on a stable workbench and ensure that the power supply is connected.
2. Setting parameters: Use the control panel or computer software on the instrument to set the required parameters as required, such as pressure range and accuracy.
3. Calibration instrument: Before use, it is usually necessary to calibrate the instrument to ensure its accuracy and stability. The calibration process can be completed by comparing with known pressure sources.
4. Sample installation: according to the actual demand, install the sample or test object to be tested on the clamping device of the instrument.
5. Conduct pressure test: start the instrument, and gradually increase or decrease the pressure as needed until the required pressure value is reached. The instrument will automatically monitor and display the current pressure value.
6. Record and analyze data: You can use the data recording function on the instrument or connect to computer software to save the measurement data for subsequent analysis and processing.
7. End of use: After completing the test, gradually reduce the pressure to zero, and remove the sample from the clamping device. Turn off the instrument and carry out necessary cleaning and maintenance.
It should be noted that different instrument models and manufacturers may have different specific use steps, so it is best to refer to the instrument manual or consult the manufacturer before operation. In addition, when using the precision servo electronic press, we should follow the relevant safety operation rules to ensure the safety of the operators.