Liquid silicone rhinoplasty is relatively difficult to remove. First, you need to make a small pick around the nose, and then use sterilized instruments to suck out the injection. However, some customers face a small amount of injection. It spreads far away, so the nose must be thoroughly cleaned, and finally rinsed with antibiotics and saline to stop bleeding. Solid silicone rhinoplasty is relatively simple to remove. It only requires making an incision from the inner edge of the nostril, and then making a small passage between the prosthesis and the outside world. After taking out the prosthesis, inject normal saline to thoroughly clean the original hole. Once, finally suture the incision. The whole process takes no more than ten minutes and is very fast. The methods of removing liquid silicone and solid silicone are different, because liquid silicone spreads easily and leaves residue in the nose, which is very dangerous. Therefore, it must be completely removed. This must be treated by an experienced doctor. This must not be done. Be careless, otherwise there will be danger. Solid silica gel is a whole. As long as it is taken out, there is no problem of getting it clean or unclean. It is relatively simple. No matter what kind of silicone implant you have, these rhinoplasty repairs require you to go to a regular plastic surgery hospital for treatment, because if it fails again, you will be in certain danger. Choosing a regular and professional plastic surgery hospital for rhinoplasty surgery will greatly reduce the possibility of rhinoplasty failure. Plastic surgery must choose a regular hospital with a good reputation to avoid serious consequences.