The so-called "old cat burns beard", even if you have rich driving experience, it is difficult to guarantee that nothing will happen. Small accidents generally have little effect on vehicles, and it will be more troublesome for large accidents to cause deformation of vehicle beams. The automobile cross beam has a great influence on the rigidity of the automobile body, so is the deformation of the automobile cross beam repaired or replaced? Let's discuss it together.

Is the deformation of automobile girder repaired or replaced?

This needs to be judged according to the severity of deformation. If the vehicle girder is only slightly bent, it can be directly corrected and used, and there is generally no big problem. If the body girder is seriously deformed or wrinkled, it can only be cut and replaced. Girder belongs to the body structure, which affects the stiffness of the whole vehicle and has a great influence on driving safety. If the body girder is deformed, it belongs to an accident car.

Sequela of automobile girder collision

1. Even after rectification, the shape of the girder can not be completely restored to its original appearance, so abnormal sound or * * * vibration is easy to occur during driving;

2. The rigidity of the car body is affected. After all, the metal will bend and fold after the deformation of the girder, and the strength of this folding is not as high as that of the original factory even after repair, and the safety performance of the automobile will be affected to some extent;

3. After the girder hits, it is an accident car. Accident cars will greatly affect the price of used cars, and when they are sold as used cars, the price will be greatly reduced.

Does the car change girder affect the annual review?

If the girder is replaced, it will not affect the annual inspection. As long as the girder is installed properly, there will be basically no problem without affecting the driving of the car. However, if the whole frame is replaced, you need to re-enter the frame number at the vehicle management office, otherwise you will not pass the annual inspection.

The material of automobile cross beam is basically high-strength steel plate, and the cross beam and longitudinal beam are connected by riveting to form a rigid structure, so that it has enough strength and rigidity to bear the load of automobile and the impact from wheels. As long as there is no accident, there is generally no need for maintenance.