First: Schematic diagram of the connection and installation of the ferrule
1. Pipe cutting: During this step, care should be taken to keep the port clean.
2. Install the nut and C-ring first, and then circle it.
3. Insert the tube into the bottom
4. Tighten the nut.
The above four steps are the card sleeve connection methods that we often come into contact with. If you follow these steps, you can basically successfully install the aluminum-plastic pipe.
Second: Schematic diagram of clamping connection
1. Pipe cutting: It is the same as the first step of the ferrule type.
2. Put on the stainless steel sleeve first, and then make a circle.
3. Insert the tube into the bottom
4. Press with pliers until the jaws are closed.
This is the snap connection in our factory, which is a common connection method. These two connection methods are also commonly used, and you can choose according to your own habits.