We focus on the technological research and development of band sawing machines, CNC band sawing machines, and fully automatic band sawing machines. We implement the principle of "people-oriented, honest management" and carefully create a new generation of products that lead the domestic market and win the favor of the market. , and achieved outstanding results.

First of all, from the analysis of the saw blade, the best material for the saw is 4 or 6 teeth. If the teeth are fine and difficult to pull, speed is the key. The speed of the saw blade must be well proportioned to the speed of the cutting blade.

Height operation of metal band sawing machine, installation precautions

Analysis of the broken tooth failure of the saw blade of the band sawing machine: ①Saw blade back clamp rim

Solution : Adjust the guide frame or the slide seat in the tensioning mechanism so that there is a slight gap between the blade back and the rim during the rotation of the saw blade

②The shape of the work itself is irregular

Solution: Adjust the profile so that the contact surface with the jaws is as large as possible to ensure reliable clamping ③ Solution to sawing machine overload: Reduce the feed speed

④The saw belt is not tightened

Solution: Tighten the saw band

⑤Chip accumulated in the guide block

Solution: Remove the guide block and clean it

⑥Saw blade selection Unsuitable

Solution: Select the saw blade with the corresponding number of teeth according to the operation panel

⑦The saw blade speed is too slow

Solution: Speed ??up the running speed

Solution: Increase the flow rate and adjust the lubrication position

⑨Insufficient hydraulic oil

Solution: Add 46# hydraulic oil Oil article excerpted from: Bandsaw ylj