Maintenance work plan 1? Near the end of the year, the Equipment Support Center actively communicated with relevant departments and carried out a number of maintenance work on the premise of ensuring the safety of various maintenance work. In the maintenance of tools, the production of nickel overhead funnel cleaner and the maintenance of lighthouse were mainly completed.
? I. Delivery of materials
? 1February, materials 2775 from the equipment support center were sent to 9 yuan, including fuel 2 12, 99 yuan, instruments 55 1, 72 yuan, finished metal products 1955, 16 yuan.
? Second, the maintenance of mobile machines
? This month, key equipment maintenance was completed on time, and machine failures were repaired 128 times, including 45 electrical failures, and the completion rate of maintenance dispatch was 96.09%.
? 1, and complete the oil leakage maintenance of No.4 steering cylinder of forklift;
? 2. Complete the replacement of the operating handle and gear switch of the front crane 1#;
? 3. Complete the replacement of the sweeper 1# roller brush;
? 4. Complete the maintenance that the 2# leg of the crane cannot support;
? 5. Complete the maintenance of oil leakage of the right inclined cylinder of the 5# forklift;
? 6. Replace the bearing of the right steering wheel of the 2# forklift;
? 7. Complete the replacement of 6# left rear tire of tractor and 5# right front tire of tractor;
? 8. Complete the maintenance of oil leakage in the 5# left steering cylinder of the hopper car;
? 9. Complete the related work of sealing tractor 1#, 2# and 3#;
? 10, and completed the maintenance of 205 generators.
? Third, the maintenance of portal crane
? This month, the maintenance plan of the portal crane and the maintenance plan of the working tools were completed on time, and 86 portal crane failures and 3 1 grab failures were repaired in real time; The completion rates of dispatching and maintenance of portal cranes are 95% and 35%, and those of industrial tools are 90% and 32%.
? 1. Complete the fracture repair of KS25-04 # balance beam;
? 2. Complete the oil leakage control of 1 1# traveling reducer of portal crane;
? 3. Complete the replacement of the left wire rope in front of the 2# portal crane;
? 4. Complete the maintenance of centralized lubricating pump of 5# portal crane;
? 5. Complete the maintenance of wire rope head of 16# portal crane;
? 6. Complete the transformation of container stabilizer;
? 7. Complete the repair of four wooden grab buckets and plastic repair;
? 8. Complete repair welding and maintenance of cracks in the funnel of Santai Nickel Mine overhead funnel:
? 9. Complete the replacement of three steel wire ropes for nickel grab 1 coal grab 1 wood grab.
? 10. Complete the maintenance of the open welding of the bucket body of the nickel grab and the open welding of the stacking plate of the lower bearing beam of the nickel grab.
? Fourth, safety and environmental protection.
? 1, welcome the equipment reflection center of the group to actively * * * cooperate with the operation department to carry out the reflection movement on the daily use of machinery and equipment in workshops and ports, eliminate hidden dangers and ensure safety. The objects of portal crane and grab are investigated in detail, and the faults and hidden dangers of the invention are repaired and punished in real time.
? 2. In the last month of the "Safety Year Sprint" and "One Hundred Days of Safety Production without Accidents" activities, comprehensively promote the safety supervision of workshop and port maintenance operations, comprehensively investigate and manage hidden dangers of accidents, raise employees' awareness of self-protection, implement the pace of safety guarantee, and strive to achieve accident-free reporting throughout the year.
? 3.65438+February 65438+July, the center organized members of the portal crane repair class to learn the basic knowledge of port machinery maintenance at noon, focusing on sorting out the basic points and on-site operation norms in daily maintenance tasks, improving the self-safety awareness of maintenance workers, and strengthening the implementation of regional closure and responsibility system for responsible persons;
? 4. Organize reflection on fire control work before New Year's Day, and * * * invented three bottles of under-voltage fire extinguishers, which were reported and replaced in real time, ensuring the guiding principle of "safety first, prevention first", and further promoting the implementation of various safety production work by clarifying safety responsibilities, strengthening the implementation of responsibilities, and promoting safety management.
? V. Work plan for next month
? 1, * * cooperate with the operation center to complete the delivery of 1#;
? 2. Complete the oil leakage repair of the reducer of the portal crane;
? 3. Complete the maintenance of oil leakage of lifting cylinders 4# and 5# of the hopper car;
? 4. Ensure the normal use of 205 generators;
? 5. Prepare all materials before the Spring Festival.
? Maintenance work plan 2
? Article 1: Purpose
? In order to make the preventive maintenance, routine maintenance, spare parts management and maintenance performance operation of the company's production equipment have rules to follow, so as to maintain the normal operation of production equipment, reduce the failure rate and improve productivity, this method is specially formulated.
? Article 2: Scope
? The maintenance of all production machinery, gas meters and public equipment shall be handled in accordance with the provisions of these Measures, including:
? 1. Responsibilities and division of responsibilities of handling units
? 2. Establishment of equipment reference data
? 3. Formulation of maintenance and lubrication plan
? 4. Implementation and inspection of maintenance lubrication plan.
? 5. Please repair the fault.
? 6. Purchase application and management of spare parts.
? 7. Management of electric welding and gas welding.
? 8. Review of maintenance performance.
? Article 3: Name and function of the organization
? First, the names of departments and related personnel mentioned in these Measures are compiled according to the existing institutions.
? Second, in case of organizational restructuring, the General Manager's Office will convene relevant personnel to review and discuss with them.
? Article 4: Division of rights and responsibilities of handling units.
? I. Processing unit
? (1) management department: the accounting department is the management department of the company's equipment.
? (2) Maintenance Department
? 1. The maintenance unit of the production department (divided into mechanical unit and motor unit due to work needs) is responsible for the maintenance of construction equipment, mechanical equipment, storage equipment, electrical instrumentation equipment and miscellaneous equipment related to production business.
? 2. General Affairs Unit of Administration Department: responsible for other equipment maintenance of public engineering units in non-production departments.
? 3. User department: responsible for the maintenance and repair of the equipment used. Where the user departments are indistinguishable, the management department is the user department.
? Second, the responsibilities of relevant departments
? (a) management department:
? 1. Establish equipment account and classify it.
? 2. Cooperate with the maintenance department to establish various equipment maintenance operation specifications.
? 3. Supervise all user departments to perform maintenance work according to specifications.
? 4. The formal contract uses the equipment used by the department for inventory, and its operation mode is handled according to the Company's Equipment Inventory Management Operation.
? 5. Check whether the name, specification and quantity contained in the equipment registration card are consistent with the actual situation at any time.
? 6. Labeling is beneficial to equipment keeper and inventory.
? (2) Maintenance Department
? 1. Assist in the installation, debugging and acceptance of newly purchased equipment.
? 2. Perform fault repair.
? 3. Formulation and implementation of regular maintenance plan.
? 4. Abnormal reaction of equipment use and failure cause analysis.
? 5. Application, supervision and acceptance of entrusted external repair.
? 6. Implementation and tracking of energy-saving plan.
? 7. Check the lubrication maintenance and lubrication implementation of the user department.
? 8, the establishment of equipment files and.
? 9. Suggestions on updating or scrapping idle equipment
? 10, work improvement, equipment improvement plan implementation tracking
? 1 1, spare parts use control and audit.
? 12, other matters assigned by the superior
? (3) Equipment using department
? 1. Assist in the installation, debugging and acceptance of new equipment.
? 2, equipment cleaning, sorting and surrounding environment clean and tidy maintenance.
? 3, according to the maintenance lubrication benchmark for equipment maintenance.
? 4. Assist in regular maintenance and troubleshooting of equipment.
? 5. Suggestions for equipment improvement.
? 6. Other matters assigned by superiors.
? Article 5: Establishment of Equipment Basic Data
? First, establish basic equipment information
? (1) After the newly purchased equipment is installed and debugged, the owner and customer of the maintenance unit are responsible for establishing the original registration form of the equipment according to the equipment manual and other materials, and filing the relevant instructions, drawings and other materials into the equipment maintenance file management.
? (2) If there are any equipment changes such as improvement and replacement, the director of the public works unit shall correct the data according to the actual changes.
? (3) The contents of equipment maintenance files shall include:
? 1. Important components of the equipment
? 2. Installation and debugging status.
? 3. Spare parts list.
? 4. Check the benchmark.
? 5. Lubrication benchmark.
? 6. Maintain records.
? 7. Lubrication records.
? 8. Cause analysis and countermeasures of equipment failure.
? Second, the conclusion of the equipment inspection benchmark
? 1. After the installation and trial operation of the equipment is completed, the supervisor of the engineering unit shall, according to the characteristics of the equipment drawings, maintenance instructions and operating conditions, prepare an equipment inspection benchmark table including items such as equipment inspection items, inspection methods, judgment standards, treatment methods, inspection cycle and inspectors.
? 2. After the equipment inspection matrix is completed, the production manager will call the owner of the user to overturn and review it, and then submit it to the general manager for approval and promulgation.
? Third, establish the equipment lubrication benchmark.
? 1. The supervisor of the public engineering unit shall make the equipment lubrication matrix for the existing equipment according to the equipment data, lubrication instructions and operating conditions. , including lubrication parts, grease used, inspection cycle, oil change benchmark, responsible personnel and other data.
? 2. After the equipment inspection matrix is completed, the production manager will call the owner of the user to overturn and review it, and then submit it to the general manager for approval and promulgation.
Maintenance work plan 3? With the promotion of the third-class hospitals, the requirements for the logistics maintenance class of the General Affairs Department are further improved. The new year is coming. Under the correct leadership and guidance of the section chief and hospital leaders, all the staff in the maintenance class will fully implement Scientific Outlook on Development, improve their ideological quality and service quality, do a good job in the logistics maintenance of the hospital, always establish themselves as the first-line clinical service demand, and strive to improve the quality of medical service in our hospital. Now we have made a work plan for 20xx years:
? 1. energy saving and consumption reduction: energy saving is the focus of next year's maintenance class, and energy saving and water saving are advocated. In terms of water use, we must resolutely put an end to leakage and repair the damage in time. In terms of electricity consumption, it is necessary to formulate energy-saving plans, reduce the power consumption of lighting equipment, and gradually phase out equipment with high energy consumption and low energy efficiency.
? 2. Equipment maintenance inspection: regularly carry out maintenance inspection on the power distribution facilities in the hospital computer room and main power distribution room, including the temperature rise of transformer liquid level and the effective grounding resistance of power distribution cabinet.
? 3. Personnel training: Each member of the maintenance team must hold relevant certificates, including high-voltage electrician's network access operation certificate, elevator operation certificate and generator operation certificate, and the personnel in the sewage treatment room must hold sewage treatment operation certificate.
? Four. Safety in production: ensure the safety of electricity consumption and production, put an end to all accidents, strictly abide by the operating rules of various electromechanical equipment and fire-fighting facilities, adhere to maintenance, strive to improve the safety awareness and self-protection ability of all staff, and achieve prevention first, combine prevention with elimination, eliminate hidden dangers in unsafe production and prevent accidents.
? V. Monitor's work: adhere to the system of weekly patrol inspection in the next department, handle problems in time when found, and do a good job in meter reading and statistics of hydropower energy consumption in the whole hospital.
? The intransitive verbs plan rectification and maintenance items: rectification of the facade decoration line of the outpatient building, rectification of the internal line of the outpatient charging office, rectification of the telephone line inside and outside the hospital, rectification of the drainage pipe network of the air conditioner in the hospital, rectification of the damaged bracket of the outdoor air conditioner in the hospital, rectification of the main distribution box of the biochemical room on the fourth floor of the outpatient service, rectification of the water storage facilities and water-making room lines in the hemodialysis room, and rectification and maintenance of the old-fashioned push window in the ward.
? Seven, save maintenance costs: advocate thrift, try to maintain what can be maintained, and never replace it.
? Eight, work discipline: strictly abide by the work discipline and duty system, duty personnel stick to their posts, to ensure the smooth progress of hospital work.