Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - Wire basket video tutorial
Wire basket video tutorial

material: metal wire and pliers with three different thickness standards. Wrap four pieces of the thickest and thinnest metal wire with medium fine metal wire.

each thinnest wire is wound several times on each thickest wire. Note that the winding should be as uniform as possible, and it will be used later. Split the thick wire. Use medium-thick gold ...

1. Cut the packing tape first, and what about the length? According to the size of the basket you made, six pieces on each side are about 85cm long, and the number is twelve. I have nine pieces on each side, and each piece is about 1.3m long?

Then tear the tape into three sides, because the tape is thick, so be careful and take your time, it will be ugly if you tear it quickly. Be sure to tear it evenly!

3 you can hold it down with a ruler, and the knife will be fine as soon as it is cut! Tear a dozen meters in length, and then put it in this way and start to cross weave, leaving a hole in the middle like a centimeter to weave the three-sided tape. Then continue to weave, and when it is almost the same, put on a circle of wire and continue to weave. Finally, I'm almost ready to close my mouth when I wear it, and then I wear the four-sided feet. This is the handle, twisted with wire! Then it is to put on the mouth! Finally, it is finished by winding the wire once!