The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

Jade bracelets are usually polished with oilstone, sandpaper, brush, cleaning, waxing and blow drying.

Rough polishing of roller. The grinding of jade bracelets should be done roughly with a roller first. Put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different types of grindstones in the drum, which need to be carefully distinguished. Trim the lines.

The recommended specification is 600× 1200× sandpaper. Fine sandpaper particles are not easy to damage jadeite. If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand.

Rough polishing of roller: put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

Tools: toothbrush, toothpaste, a small dish of peanut oil, glasses cloth, non-slip gloves. First soak the jade bracelet in warm water, take it out and apply a proper amount of toothpaste on the bracelet. The dose is about the size of a edamame. Apply toothpaste evenly to the bracelet with a toothbrush and polish it repeatedly for about ten minutes.

How is the jade bracelet polished (how is the jade bracelet polished)

1, polishing process method 1: soaking and daubing: put the jade in warm water for a while, take it out and daub a proper amount of toothpaste, the dosage is about the size of a soybean. Repeated grinding: Apply the toothpaste evenly with a toothbrush, and do a whole body SPA for it, and grind it repeatedly for about 10 minutes.

2. The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

3. Fine sandpaper particles are not easy to damage jadeite. If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand.

4. Passing the oilstone is to polish the jade bracelet with a small oilstone first. If the carving of the road ahead is thick, it is necessary to use oilstones with different thicknesses to pass through in turn. Blue silk is to polish the surface with a grinding wheel and push it repeatedly.

5, roller rough throwing. The grinding of jade bracelets should be done roughly with a roller first. Put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different types of grindstones in the drum, which need to be carefully distinguished. Trim the lines.

6. Tools: toothbrush, toothpaste, a small dish of peanut oil, glasses cloth and non-slip gloves. First soak the jade bracelet in warm water, take it out and apply a proper amount of toothpaste on the bracelet. The dose is about the size of a edamame. Apply toothpaste evenly to the bracelet with a toothbrush and polish it repeatedly for about ten minutes.

How to solve the problem of unsmooth jade bracelet

1. If the surface of the jade bracelet becomes rough and no longer smooth, it can be polished to make the jade bracelet glow again. Wipe the jade bracelet with a wet towel first, then evenly apply toothpaste on the jade bracelet and polish it repeatedly 10 minute.

2, jade bracelets are no longer smooth after a long time, and polishing can reproduce the luster. Minimalist polishing method. After taking it out, apply a proper amount of toothpaste to the bracelet, evenly apply toothpaste to the bracelet with a toothbrush, and polish it repeatedly for about ten minutes. Wash it in warm water, apply a little peanut oil and rub it back and forth with a pair of glasses cloth.

3. The surface of the jade bracelet is rough and not smooth, so it can be polished in a professional jewelry store. Generally, the grinding and polishing steps of jadeite bracelets include drum rough polishing, thread trimming, smooth surface trimming and shaping.

4. Soak in clear water for more than 2 hours, then wash it again to make jadeite absorb water, and then take it out to dry.

How to polish jade bracelets at home

If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

Tools: toothbrush, toothpaste, a small dish of peanut oil, glasses cloth, non-slip gloves. First soak the jade bracelet in warm water, take it out and apply a proper amount of toothpaste on the bracelet. The dose is about the size of a edamame. Apply toothpaste evenly to the bracelet with a toothbrush and polish it repeatedly for about ten minutes.

Fine polishing, coating diamond powder on jadeite, and then polishing with hard skin. Cowhide is widely used in China and elephant skin is widely used in Myanmar, so jadeite is polished. Cleaning, the purpose is to clean the residual polishing powder on the polished jade. It is mainly cleaned by ultrasonic machine, and the parts that cannot be cleaned are wiped with alcohol.

The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

Rough polishing of roller: put the carved jade bracelet and a certain amount of polishing powder into the roller with grindstone and inject a proper amount of water. Different jadeites need different millstones. Repair line: it is necessary to prepare sanding alcohol lamp for repair line.

First put the jade bracelet in warm water 10 minute. Put some toothpaste on the back of the jade bracelet. Brush evenly with a toothbrush, and brush and grind repeatedly for about 10 minute. Wash it with warm water again. After washing with warm water, apply a small amount of peanut oil.

How to polish a jade bracelet How to polish a jade bracelet

1, followed by jade cleaning, mainly by ultrasonic cleaning, and then wiping the unclean places with alcohol. Finally, after waxing the jadeite, the jadeite is dried, and the polishing of the jadeite is completed.

2, roller rough polishing, jade bracelet polishing must first be rough polished with a roller, put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different grindstones in the drum, which need to be carefully distinguished.

3. If the jadeite is not finely processed, it can be polished with polishing powder+small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

4. The jadeite bracelet itself can be polished by minimalist polishing, matte polishing and multiple polishing.

5. The surface of jade bracelet needs plastering and polishing. Coat a layer of paste polishing powder on the surface of the jade bracelet and polish the surface with a 2000-mesh grinding wheel, and then repeat the first two steps, usually twice; Brush and seiko, coat the surface of jadeite with polishing powder and then throw it with a hard brush.

6. Paste: Apply a layer of paste polishing powder on the carved jade surface, and the green color is chrome oxide orange red and cerium oxide. Push grinding, grinding the surface with 2000 mesh grinding wheel. Repeat the first two steps, usually twice. Brush, coat the surface of jade with diamond powder and then throw it out with a hard brush.

How to polish jade by yourself? How to polish your own jade bracelet?

Rough polishing of roller. The grinding of jade bracelets should be done roughly with a roller first. Put the jade bracelet into a roller with grindstone and a certain amount of polishing powder, and add a proper amount of water. It should be noted that different jadeites have different types of grindstones in the drum, which need to be carefully distinguished. Trim the lines.

Jade bracelets are usually polished with oilstone, sandpaper, brush, cleaning, waxing and blow drying.

The first step is to pass the whetstone, that is, to polish it with a small whetstone first. If the carving on the path ahead is thick, it is necessary to use oilstones with different thicknesses to pass through in turn. The second process is to apply "green silk". The third way is called nailing. It is to dip nails in diamond powder to complete the details of carving.

Alcohol is also possible, but alcohol should be purchased and used carefully. The last step is to wax the jade. Waxing jade can protect its surface. Evenly coat a layer of wax on the surface of jade, then wash it off with warm water and blow dry it. The whole step of how to polish jade is completed.

How to polish jade at home: You may use polishing powder, brush, polishing sandpaper, non-slip gloves, toothbrush, toothpaste, animal leather, peanut oil and low-power hand-held grinder to polish jade at home. Fine sand particles are recommended for polishing paper, which is not easy to damage jadeite.

The marking and polishing steps of jade bracelet are as follows: paste grinding, that is, coating a layer of paste polishing powder on the surface of jade bracelet, grinding the surface with a 2000-mesh grinding wheel, and then repeating the first two steps, generally twice; Brush and seiko, coat the surface of jadeite with polishing powder and then throw it with a hard brush.