Sheet metal hammers are generally used in automobile manufacturing and automobile maintenance. When there are scratches or damages on the outside of the car, it is necessary to knock and scrape putty with a metal hammer bit by bit. Generally used for car maintenance.
There is a specific hammer type.
1. Ball hammer. Multi-purpose sheet metal processing tool, used to correct bending structure, generally used to process initial body parts.
2. hammer. Hammer is an essential tool for repairing damaged sheet metal parts. Used to knock the damaged sheet metal back to its original shape and clean the damaged sheet metal when replacing it.
3. Rubber hammer. It is used to strike steel plates without damaging the painted surface.
4. picks and hammers. The tip of the small dent is used to hammer out the dent from the inside, and the central part can be tapped lightly. Flat ends and top irons are used to remove high points and ripples.
5. Impact hammer. When repairing a large dent, use an impact hammer to preliminarily correct the dent surface, or process the inner plate and strengthen related parts. This situation requires a lot of strength, not a smooth surface.
6. Improve the hammer. After the dent is repaired with an impact hammer, a finishing hammer is needed to obtain the final shape.
7. Top grade iron. Usually, the hammer hits the back of the metal plate, and the hammer and the top iron work together to lower the high part and raise the low part.
8. Wedge iron. It has a variety of shapes and sizes, and can be matched with different panel shapes.
9. choose. Used to enter a limited space to pry up a pit with different lengths and shapes.