I found several related cases, hoping to help my friends. Ha ~ —————————— (1) I ventured to jump down and fell into the slipway. Date of accident:198510.0011.08: 45. Accident location: Maocun Power Plant site. The main reason is that it violates the operating rules. Casualties: 1 person died. Brief description of the accident: Wei xx, the carpenter leader, led Shao xx (a temporary worker) to install the shaft gate in the No.6 cooling tower. After the gate descends about 700 mm along the gate slot, it can no longer be put down. Shao xx then looked, lifted a cover plate to face the shaft, and jumped with his hands on the two walls of the main cabin. Just listen to the sound of "Ah", Shao xx (male, 25 years old, carpentry level 4, engaged in this type of work for five years) fell into the central shaft and slipped into the bottom of the circulating water pipe, with a drop as high as 1 1.33 meters, and died after being rescued. Cause analysis of the accident: Shao xx was so confident that he went down to the bottom plate of the main tank without stepping on the distribution tank mouth as an intermediate step. But when the center of gravity is unstable and the feet are suspended, they quickly jump off and slide into the central shaft. Note: (1) No adventure. (2) Conduct safety technology education to improve the quality and awareness of employees. (II) Painting, illegal smoking, fire, death Date:1August 27th, 988 18: 20 Accident location: Baotou No.2 Power Plant site. Main reasons: violation of operating rules, number of casualties: 1 person died. Brief description of the accident: The wall of No.6 water tower in Bao 'er Power Plant adopts iron PVC paint and chlorine sulfide two-component color paint for anticorrosion and impermeability. Brush painting is to lift a 6-meter-long hanging basket with a slow crane, upload 5 people, 20 barrels of paint and half a barrel of spare thin rice. When painting from top to bottom to 60 meters, temporary workers Li xx and Huang xx smoked and threw unburned match sticks into the paint bucket. The paint and thinner caught fire instantly and the fire spread. Li xx (male, 25 years old, electrician, engaged in this type of work for three years 10 months) was surrounded by a fierce fire. When the hanging basket landed, Li xx had been burned to death. Accident Cause Analysis: (1) The main reason for the accident is that the responsible persons at all levels in the construction site failed to take concrete and effective fire safety measures. (2) Li xx and Huang xx smoke beside flammable materials, and throw unburned match sticks into a paint bucket to catch fire. Violation of regulations is the direct cause of the accident. Precautions: batching and painting personnel are strictly prohibited from smoking at work. Before going to work, check whether you carry kindling, and ensure that fireworks are strictly prohibited in inflammable and explosive places. (3) The hanging plate is unprotected and people fall. Date of accident: April 4th 1987, 14, 15: 32. Accident location: the construction site of Qingzhen Power Plant expansion project. Main reasons: lack of protective devices. Casualties: 1 person died. Brief description of the accident: Three people, including Guo xx, a rigger, led six migrant workers to the chimney to hoist the tray. When the lifting platform rises from 196 m to 197.5 m, two of the six inverted chains have reached the full stroke. At this time, Guo xx and Guo xx each changed a chain. When the chain hook is removed, the hanging plate will shake slightly. At this point, Yang xx, a migrant worker, stood on the higher side of the hanging tray (due to the unsynchronized pulling of six migrant workers, the tray diameter was 5.4m), only about 200~300mm away from the edge of the hanging tray. At this time, there was a gap of 400mm between the hanging board and the brick lining. Yang xx (male, 19 years old, contractor) fell to the ground through this gap and died after being rescued. Cause analysis of the accident: (1) Inadequate protective measures for hanging boards and construction workers not wearing seat belts are the important reasons for the accident. (2) When lifting the lifting platform, there is no unified command by a special person, and the six inverted chains are not synchronized, which causes the lifting platform to tilt, resulting in a large gap on one side of the lifting platform. The direct cause of the accident was that the shaking man was unstable and fell down. Precautionary measures: (1) Improve the safety protection facilities of the hanging tray, and fasten the safety belt when working at height. (2) The lifting of the hanging plate shall be commanded by special personnel to prevent the hanging plate from tilting. (4) A man who sawed long material stabbed his left eye and died. Date of accident:1September 25th, 979 15: 45. Location of the accident: Woodworking Room of Real Estate Construction Team of Jilin Thermal Power Second Company. Main reasons: violation of operating rules, number of casualties: 1 person died. The accident briefly happened: Sun xx replaced a piece of 40×60×2590mm wood with a chainsaw window wood with a square of 30×40 mm When the square was pushed into the 940 mm kerf, when there was still 650 mm left, the square wood was bounced off by the saw blade, and a wooden thorn in the shape of a conical knife flew out and pierced Sun xx (. Cause analysis of the accident: The sawn 40×60×2590 mm square timber should be pushed by one person and operated by one person, which caused the sawn material to bounce off by the saw blade, causing the square timber to break and causing an accident. Note: (1) When sawing long materials with a sawing machine, two people should operate it. (2) Before sawing, the edge tip should be cut off. (3) Strictly abide by the operation rules of sawing machine and wear personal protective equipment. (5) I don't know how to send small materials by hand, and my right thumb is sawed off. Date of accident: 1970 10 14 years122 October. Accident location: Baoshan Power Plant project construction site. Main reasons: violation of operating procedures. Casualties: 1 person seriously injured. Brief description of the accident: carpenter (temporary worker) Yan xx was making a nail box in the carpenter's room, but there was still a small piece of wood board (500×50 mm) missing, so he took an old wood board with a small amount of cement and sawed it off on the circular saw according to the required specifications. Later, Yan xx tried to cut a small piece of 5 mm on the circular saw machine because the saw blade was too blunt, and pushed it with both hands from the beginning. When the tail was nearly 70 mm, he pressed the wooden strip forward with his right thumb and forefinger. As a result, the thumb of the right hand slipped into the saw slot and was sawed off, seriously injured. Cause analysis of the accident: (1) The direct cause of the accident is that after entering the factory strictly, it was not educated on the operation procedures of circular saw machine, and it was illegal to transport small materials directly by hand. (2) The woodworking machinery such as the circular saw in the woodworking room lacks strict management, does not seriously implement the safety operation procedures, and poor management is one of the reasons for the accident. Precautions: (1) Implement safety operation procedures. When sawing small materials with circular saw, it is forbidden to feed directly by hand. (2) Strengthen the management of woodworking machines and tools. (VI) The date of the three-finger accident of wet short sawn timber with a knot in hand:1988 at 7: 00 on May 9 15. Location of the accident: a power plant site in Taiyuan. Main reasons: violation of operating procedures. Casualties: 1 person seriously injured. Brief description of the accident: Zhang xx, a fifth-class carpenter, sawed a square wood of 600×50× 100 mm with a circular saw. Zhang operated alone because the wood was wet and had a big scar, so he sawed the wood and the square wood flew out. Zhang (male, 29 years old, five-level carpenter, this kind of work has been done for 14 years) lost his balance, his right hand touched the saw blade and three fingers were sawed off. Cause analysis of the accident: Zhang xx violated the operating rules, did not use the pusher, and there was a problem in selecting materials, resulting in a serious saw injury to his right hand. Precautions: (1) Strictly implement the safety operation procedures of circular saws. (2) Don't use wet knotted wood. References:

/dianzi/gsal/20 100 1/44 1 17 . html