For friends with nasal tip hyperplasia, nasal tip reduction can be used. The operation principle is: make a V-shaped skin incision along the front edge of the lateral foot and the medial foot of the alar cartilage, and separate the nasal cartilage sharply through the incision. Pull the alar cartilage out of the incision as far as possible with a small retractor to cut off the adipose tissue on the cartilage surface. Then, most of the upper and lateral parts of the cartilage are removed, leaving only an L-shaped cartilage at the center and edge. In addition, if the alar is too wide or too thick, you can make a skin incision along the front edge of the lateral foot of the alar cartilage, secretly separate the skin from the alar cartilage below through the incision, pull the alar cartilage out of the incision as far as possible with a small hook, cut off the soft tissue on the cartilage surface, and then cut off the upper and outer parts of the cartilage. Then, in the nostril, a diamond-shaped vestibular skin and nasal mucosa were removed at the inner side of the alar base. If the alar is thick, you can cut off the excess adipose tissue with small scissors through the incision. After listening to the above introduction, do you know?