How to deal with moldy refrigerator door strips? As one of the essential household appliances in our daily life, the refrigerator has made great contributions to us. If there is no refrigerator at home, vegetables can't be refrigerated and kept fresh. How to deal with moldy refrigerator door strips? Let's have a look.

How to deal with moldy refrigerator door strips? 1 1. What should I do if the refrigerator is moldy and black?

1, vinegar

First, turn off the refrigerator, wipe the moldy place with a soft cloth, then add 200ml vinegar to half a basin of detergent, soak the rag and wipe it back and forth, and finally scrub it clean until there is no residual detergent component.

2. Toothpaste

Apply toothpaste to the moldy part of the rubber strip, wait for a few minutes, and then wipe it with a wet rag. The main thing is not to pull the rubber strip too hard, so as to avoid the deformation of the rubber strip affecting the sealing performance. Then clean it with clear water, and you can easily improve the moldy situation.

3. Alkaline noodles

We just need to pour this spoonful of alkaline noodles, put this alkaline noodles in this refrigerator rubber strip, so as to effectively solve this dirty and moldy phenomenon, and then pour a little water into it, without pouring too much water, just soak the refrigerator rubber strip, and then let it stand for three minutes. After three minutes, we can take out a piece of toilet paper to clean this refrigerator rubber strip. We just need to put another card on the toilet paper. We just need to put it on the rubber strip of the refrigerator and rub it back and forth, so the dirt and mildew on it can be easily cleaned. At this time, we can change a piece of paper and clean it again, so that the rubber strip of the refrigerator can be very clean.

4. alcohol

Pour 150ml alcohol into an open bottle or bowl, and then wrap the paper towel with a fork, taking care to keep it firm. Then put the paper towel on the fork into the mouth of the container and soak it in alcohol. Press it repeatedly along the gap of the sealing strip until now, and soon you will see that the paper towel is black, and the gap is full of dirt and mold. This method can not only clean quickly, but also play a role in sterilization.

Second, how to correct the deformation of the rubber strip?

If the rubber strip is deformed and loose, it will easily lead to the refrigerator door not being closed tightly, which will lead to the outside hot air blowing into the refrigerator, making it unable to refrigerate, resulting in the total water accumulation in the refrigerator and the rising electricity bill. In this case, we can take rubber strip out of the refrigerator and soak it in hot water. When it is soft, install the adhesive tape on the refrigerator door, blow it with a hair dryer, and finally close the refrigerator door and open it after a few hours.

Third, the reason why the tape is moldy

The reason why the rubber strip in the refrigerator is moldy is mostly because the food in the refrigerator has an odor, and there has been water in the refrigerator, which leads to an increase in bacteria. In addition, the refrigerator door is closed, so natural rubber strip is easy to breed bacteria. Therefore, in order to prevent the rubber strip from going moldy next time, I suggest that you regularly disinfect and clean the refrigerator with alcohol or special cleaner for the refrigerator. In addition, it is best to box the food with special preservation methods, so as to prevent the food from going bad.

Fourth, refrigerator cleaning skills

1, clean the refrigerator with toothpaste, or make it into a thin paste with baking soda, apply it on the white knees of the refrigerator, and wipe it off with a dry cloth when it is dry.

2. Wipe the refrigerator with 1 tbsp washing powder and 5 liters of water, and finally dry it with a rag to restore the white luster.

Generally speaking, household refrigerators should be cleaned regularly. You can go to the drugstore to buy a bottle of medicinal alcohol, pour it into the watering can for watering flowers, spray it on the dirty place of the refrigerator with the watering can, and then dry it with a dry cloth. Some unpleasant refrigerator smells will disappear with the evaporation of alcohol.

4. After cleaning and plugging in the power supply, check whether the temperature controller is set in the correct position. In addition, it is best to clean the refrigerator every two weeks. Empty the refrigerator at least once a month and discard expired, broken and inappropriate food.

Note: Do not scrub the refrigerator with washing powder, decontamination powder and gasoline. In addition, once again, when wiping the electrical components of the refrigerator, you must unplug the power plug of the refrigerator to avoid electric shock.

How to deal with moldy refrigerator door strips? 2 What should I do if the refrigerator seal is not sticky?

Anyone who has a refrigerator at home may have noticed that the refrigerator can be sealed well because there is something called a sealing strip around the refrigerator door. Some people may not know that this sealing strip has a service life.

What if the refrigerator tape doesn't stick? The refrigerator sealing strip is not good or not sticky. Under normal circumstances, the door will not be closed, otherwise it will consume a lot of electricity because of poor sealing. At this time, you can deal with more common problems.

The refrigerator sealing strip is not stuck. If it's not serious, you can handle it yourself first. You can first keep a certain distance with the hot air of the hair dryer, and then manually pull the sealing strip to blow, so that the sealing strip can be blown soft and can be improved when it cools down.

The sealing strip won't stick. It's usually used for too long. At this point, the sealing strip may be dirty. If you want a thorough treatment, you can take it out and soak it in hot water for cleaning. Use a big basin, don't fold it too badly. You can put some washing products, wash them carefully and soak them for 15 minutes. After the treatment, try to dry the seal, and the installation will be better.

If it still doesn't work well after treatment, under normal circumstances, you need to buy a sealing strip for a new one and treat it thoroughly. Replacing the sealing strip can be purchased online or in a home appliance repair shop. You can usually install it yourself.

Summary:

1, simple treatment, use a blower to blow the sealing strip with hot air to soften it.

2. Remove it and clean the sealing strip soaked in hot water.

3. It's really no good to replace it with a new one and deal with it thoroughly.

How to deal with moldy refrigerator door strips 3. Brief introduction of refrigerator sealing strip

The refrigerator door seal consists of two parts, one is soft SPVC sheath, and the other is magnetic rubber strip. PVC sheath is made of raw materials through extrusion. The shape varies with different products, models and designs. Divided into different shapes, heights and lengths. The purpose is to match the design of refrigerator. Magnetic tape is made of magnetic material and plasticizer by combining, extruding and magnetizing. This door seal can also be used in disinfection cabinets, drinking fountains, display cabinets and so on.

Second, what should I do if the refrigerator sealing strip is not tight?

1. Remove the refrigerator door from the box, and use a sharp knife to cut the joint of the four corners of the door seal.

2. Take out the plastic magnetic stripe from the refrigerator door seal and stick it on the box.

3. Put the removed door seal in a basin filled with hot water at 55-65 degrees Celsius, soak for 4-6 minutes, and take it out. Hold the two ends of the door seal by hand, flatten the uneven part of the door seal (the tension should not be too large to avoid breaking), then put it on the flat glass, and then press it with glass. After natural cooling, the door seal will become flat and straight. If you can't do it once, you can repeat it many times until the unevenness disappears.

4. Due to stretching, the length of the door sealing strip after the above treatment is slightly longer than the original one. Therefore, the extra part should be cut off according to the original length, and the end should be beveled at a 45-degree angle.

5. Install the magnetic stripe into the door seal according to the reverse procedure of disassembly, then put the door seal back in its original position and glue the four corners of the door seal with 502.

Third, the refrigerator sealing strip is not strictly solved.

1. Turn up the refrigerator door seal, remove all the screws fixing the door seal one by one with a Phillips screwdriver, and then pull the door seal off the door liner.

2. When installing, first put the door sealing strip around the door lining, and then stick it on the inside of the door. Align the original fixing holes, fix them at the upper side with screws first, and then tighten the screws at the diagonal position. Before tightening the screws, pay attention to the flatness and position of the door sealing strip.

3. Close and open the door after installation, and check the seal between the door and the box. If the sealing is poor due to poor installation, loosen 2-3 screws at the poor sealing part of the door and make adjustment.

4. If the door seal is deformed, it can be heated and shaped with a hair dryer. If the four corners of the door seal are not well sealed, the door seal at the corner can be turned up and filled with appropriate amount of foam plastic.

5. After installation, open and close the door several times to test whether it can be opened and closed freely.