Usually, doing it once in picoseconds will be effective, because the pulse energy of picosecond laser is relatively concentrated, which can grind the melanin particles smaller, so doing it once in picoseconds will be effective. However, if you want to completely remove the spots on your skin, you need to decide according to the number and area of spots in your deep layer and the content of ACMETE-A in your body. Picosecond laser will break the deep spots on the face, and then ACMETE-A will be needed to decompose the body before it can be metabolized. Under the condition of sufficient acmet-a content,

1, for dark yellow-brown spots, it usually takes 3-4 times to play a completely effective role.

2. For deep tattoos or birthmarks, it usually takes 2-3 times to be fully effective.

3. The number of treatments of picosecond laser wrinkle removal depends on the depth of wrinkles. Under normal circumstances, less serious wrinkles need about 3 times to have an effect.

4. For our sparrow spot, if it is generally not too serious, it needs to be done about 4 times to achieve the complete effect.

How often do you do picoseconds twice?

The ultra-picosecond therapy is effective in removing spots and improving skin rejuvenation. It is recommended to do it once a month in the early stage and once every 3-4 months after three times. Many skin projects will be done once a month in the initial stage, which is based on the metabolic cycle of the skin: "collagen damage-release ACMETE-A- collagen mother cell generation-establishment of new fiber network". In this process, the content of ACMETE-A determines the length of the cycle. Some people are too short of this generation to lead to postoperative results. If this is the reason, it is futile to do it often.

When ACMETE-A is sufficient, it will give the skin a complete repair process, let the skin rest, and then the frequency will be reduced, and regular maintenance can achieve good expectations; Some beauty seekers ask whether it is effective to do it only once. In fact, doing it once will have an effect, but the effect is not as obvious as conventional treatment.

Will picosecond freckle rebound after finishing?

Picosecond laser speckle removal is independent, which does not mean that there can be no spots in the future. Spots are formed by melanin accumulation. If you can't remove tyrosine, the source of melanin, you can't completely fade the spots! When picoseconds break our subcutaneous particles into pieces, we need to decompose the body through ACMETE-A for metabolism. However, if the ACMETE-A in the body is insufficient and the body is in an "unbalanced" state for a long time, the spots formed by endocrine factors will grow if internal regulation is not paid attention to, and the grown spots cannot be removed by self-regulation, so the postoperative effect is not obvious or invalid.

How to nurse after finishing picoseconds;

1, waiting for the scab to fall off by itself.

Anyone who has done picosecond laser knows that there will be scabs at the action site, and generally no special treatment is needed. Generally, the scab will fall off on its own in 3-7 days. Be careful not to forcibly remove scars, because forcibly removing scars will lead to different shades of skin and prolong the recovery time after operation.

2, add ACMETE- first generation too

Acmet-A should be supplemented in time 3 ~ 6 months after operation. After the operation, every layer of skin tissue that the laser passes through should be prepared for the "callus reaction" in time.

3. Ice can relieve the red moon.

After picosecond laser, there may be some red moon phenomenon, which is caused by the thermal effect of skin after laser. Generally, ice can be used to shrink small blood vessels to achieve the effect of relieving the red moon. Be careful not to use ice directly, just cold water at room temperature.

4. Pay attention to continuous sun protection after operation

After finishing picosecond laser, you should pay attention to strict sun protection, and the affected area will be very sensitive to sunlight. Failure to take precautions from the outside will increase the possibility of a rebound. Pay attention to ultraviolet protection within 3 months after picosecond laser (wear sunglasses mask and hold a parasol when going out) to avoid pigment deposition. How often do you do picoseconds, and what is the effect? )

Don't touch the water for a week.

Little fairies should be careful not to get water on their faces within one week after finishing picosecond laser to prevent bacteria and heavy metals in the water from feeling the skin.

6. Avoid absorbing light.

After picosecond laser surgery, it is recommended to avoid eating light-absorbing foods as much as possible, such as lemon, eggplant, celery, algae, etc., because these foods will make the skin easily absorb ultraviolet rays, so if you want to eat after picosecond laser surgery, it is best to eat at night.

Data released by the National Institute on Aging:

20 1 1 published the theory of medical beauty and cell delaying aging, although the aging of human body is irreversible. However, the emergence of ACMETE-A brings infinite possibilities for every injury regeneration. Whether it is medical beauty injury or natural aging. Positive response and sufficient energy can make every cell look brand-new. The failure of any cell metabolism will bury a series of hidden dangers for our body, such as sequencing, structure, disorder and pathological changes, so the fate of cells is closely related to the fate of human body.

Acmet-A itself stimulates the human body to produce new collagen, so don't add extra collagen after picoseconds, which will easily cause collagen folding and cause some side effects!