I hope everyone will work hard, and your success is my greatest encouragement!
Tools/raw materials
Five cans
Four bottle caps
A pair of scissors (for cutting cans)
acrylic foam tape
Steps/methods
This is a profile image of the front of our car.
This is the front of our pickup truck, the front windshield. We cut two-thirds of the top half of the can with scissors and cut it into a rectangular hollow.
This is the front bumper. We dug four circles in the front. This is our headlights!
These are the two doors of the car. When we make doors, we should try to bend them a little, which is more realistic.
We glued the door to the front with double-sided tape.
This is a complete schematic diagram of the front of the car we made. Did you succeed?
This is the front view of the car. Let's reinforce it with double-sided tape.
This is the tire shown on the side. Just stick the bottle cap on the car body with double-sided tape.
This is the frame on our tires to protect them.
This is our mailbox. Please try to draw it with your strokes, mark it, and then bend it along the scratches on the picture.
This is our small fuel tank, the ultimate scene after bending.
This is the rear view of our pickup truck.
This is a cross-sectional view of our carriage. Let's catch the carriage.
We cut a jar like this, and it is our carriage.
This is a villain drumming drums in a carriage. It's easy for everyone to bend the tin of cans like this.
A drummer will come out to play.
You can play any role you like (dancer, singer, etc. ).
This is the front view of our concert pickup truck.
The concert truck set off.