Cut the bottom sample. Cut shoe samples with paper; Fill in Melaleuca. Filled with 100% pure cotton; Nano flounder. Wiring must be crossed, and nano-edge stitches should be arranged neatly; Cut the bottom edge. One is to flatten the accepted sole with a hammer. Second, trimming, that is, cutting off the remaining edge of the prepared sole with special tools. The third is to lay high-quality cotton on the soles. Fourthly, sewing the interlining; Cut the vamp. Adopt high-quality upper lining as lining; Sew the upper. After air drying, the excess parts of the sample are cut off, and then advanced sewing is carried out; Shoes. Using traditional manual needle and thread to assist; Last pair of shoes. A good pair of shoes must be shaped by a shoe last; Trim, trim. Cut off the extra thread and remove the foreign matter on the upper. After drying, it is finished.