There is often a strong emotional bond between people and dogs, and dogs have become human pets or non-utilitarian partners.

Tools/Raw Materials Square paper Step/Method: Put one side of the paper up with a black pen. Fold the paper diagonally in half and then unfold it.

Fold the three corners of the paper to the center point respectively. Fold the paper in half

Fold the sharp corner to the left along the line formed by the midpoint on the top of the first small square and the midpoint on the bottom of the second small square. Expand.

The connection in the previous step is a valley mark, and the left half is unfolded. Flatten the erected part.

Fold a part of the lower corner of the figure formed in the last step, and then fold a small part of the upper part to make the puppy's nose. Fold a small part of the two corners of the figure formed in the fourth step to the middle to make the puppy's ears.

Fold the two right angles in the lower right corner inward respectively.

How to origami a puppy

First, you need a square piece of paper.

Fold the diagonal in half. After opening, fold the other pair of diagonal corners in half.

Fold the three corners to the position of the center point. Turn it over.

Fold the left side to the middle position, but the back corner cannot be folded. The right side is also folded to the middle position. Similarly, the back corner cannot be folded.

Fold down the upper corner of the origami model. Fold down two corners.

Open the corner folded in the previous step, pull out the inner part and fold down. The right corner is also open, and the inner part is pulled open and folded down.

Fold the top to the bottom, that is, fold the top half in half. Turn the back part to the top like this.

Turn to the back and fold the upper left side in half.

Open the part folded in the previous step and fold it to the right. Here, the left and right sides are folded in half according to the crease of the upper two parts, the middle overlapping part is folded in half to the vertical position, and the vertical part is folded in half to the right.

Fold the right half from back to left. Fold the right part.

Open the crease folded in the previous step. Fold the upper left part to the right.

Fold the crease made in step 2 1 so that the narrow part on the right side is vertical. Then fold the right part in half to the left.

After opening the long and narrow part, fold the horizontal crease to the vertical position as shown in the figure, and fold the back. It will look like the picture after folding. The triangle on the left in the picture should be made into a tail, and this part should be folded inward to a certain extent. The degree of folding can be determined by looking at the final finished product drawing.

The outer triangle also needs to be folded constantly. More like a tail.

At the other end, the small sharp corner is turned up a little, and then the back part is folded continuously, and the head of the origami puppy comes out. Just like this, black the triangle folded in the last step, stick it on your eyes, and then adjust the shape of your head.

Please refer to zhidiy/zheshirumen/2125/for specific operation steps and corresponding picture descriptions.

How to fold the simplest puppy?

How to fold a puppy:

1. Place one side of the paper opposite to yourself, fold it in half along the horizontal and vertical midlines, and then unfold it.

2. Fold the left and right corners of the paper to the midpoint respectively.

3. Fold the folded part from the middle to both sides.

4. Fold the corner below the middle of the folded part outward in half, and then unfold it.

5. Fold one corner of the top paper to the middle, so that it falls on the crease point and folds symmetrically.

6. Fold the bottom of the left and right parts up to the middle of the two layers.

7. Turn the paper over and fold it in half to the left and right vertical center lines respectively.

8. Fold up the two small corners exposed below after folding, so that the lower edges are flush.

9. Fold the left and right corners of the paper up to the middle to hide the corner between the two layers.

10, the top small triangle is folded back, and then the left half of the paper is folded back to the right.

1 1, the lower left corner is folded up, and then the front and rear layers are folded up from the outside along the crease.

12. Draw eyes and nose on the puppy, and a cute puppy will be folded.

Teach you to fold a puppy.

There is often a strong emotional bond between people and dogs, and dogs have become human pets or non-utilitarian partners. Tools/Raw Materials Square paper Step/Method: Put one side of the paper up with a black pen. Fold the paper diagonally in half and then unfold it.

Fold the three corners of the paper to the center point respectively.

Fold the paper in half Fold the sharp corner to the left along the line formed by the midpoint on the top of the first small square and the midpoint on the bottom of the second small square. Expand.

The connection in the previous step is a valley mark, and the left half is unfolded. Flatten the erected part.

Fold a part of the lower corner of the figure formed in the last step, and then fold a small part of the upper part to make the puppy's nose.

Fold a small part of the two corners of the figure formed in the fourth step to the middle to make the puppy's ears.

Fold the two right angles in the lower right corner inward respectively.

Illustration of dog origami head and limbs

Hand origami, puppy origami, children's simple origami, origami steps are clear, you should also try. Take your baby and use your head. First, show the finished products of children's hand-made origami and puppy folding. Step one. Prepare a square piece of paper. Hehe, my paper is folded, which is a bit ugly. Children's manual origami puppy folding method, the second step. As shown in the figure, fold in half. Step three. Fold the dog's ears. Fold the puppy's mouth with the child's hand. Step four. Fold the puppy's mouth with the child's hand. Step five. Click on the puppy's eyes and nose successfully. Simple. This is the simplest hand-folded paper.

How to fold a dog with paper

How to fold a puppy with paper Simple animal origami has always been loved by friends who love animals. The simple origami animal shared with you here is a puppy. As long as you make it in a few simple steps, you can easily get a cute and realistic origami puppy. If you like this origami puppy, do it! 1. First, you need a square piece of paper.

2. Fold the diagonal in half. 3. After opening, fold the other corner in half.

4. Fold the three corners to the position of the center point. Turn it over.

6. Fold the left side to the middle position, but the back corner cannot be folded. 7. The right side is also folded to the middle position. Similarly, the back corner cannot be folded.

8. Fold down the corners of the origami model. 9. Fold off two corners.

10. Expand the angle folded in the previous step. 1 1. Pull out the inside part and fold down.

12. The right corner is also open, and the inside part is opened and folded down. 13. Fold the top half to the bottom, that is, fold the top half in half.

14. Like this, turn the back part to the top. 15. Turn to the back.

16. Fold the upper left side in half. 17. Open the part folded in the previous step and fold it to the right.

18. Here, the left and right sides are folded in half according to the crease of the upper two parts, and the overlapping part in the middle is folded in half to the vertical position. 19. Fold the vertical part to the right.

20. Fold the right half from the back and fold it to the left. 2 1. Fold the right part.

22. Open the crease folded in the previous step. 23. Fold the upper part on the left to the right. 24. Fold the crease made in step 2 1 so that the narrow part on the right side is vertical.

25. Then fold the right part in half to the left. 26. After opening the long and narrow part, fold the horizontal crease to the vertical position as shown in the figure. 27. Fold your back, too. It will look like the picture after folding.

28. The triangle on the left side of the picture should be made into a tail, and this part should be folded inward to a certain extent. The degree of folding can be determined by looking at the final finished product drawing. 29. The outer triangle also needs to be folded constantly.

30. This is more like a tail. 3 1. Turn the small sharp corner up a little at the other end, and then fold the back part continuously, and the head of the origami puppy will come out.

32. Just like this, paint the triangle folded in the last step black, stick it on your eyes, and then adjust the shape of your head to perfection.

How do origami puppies and children's handmade puppies simply fold?

1. First, fold the top edge and bottom edge of the square paper in half, then unfold it to leave a crease in the middle, then fold the right side and the left side in half, and then unfold it to leave a crease.

2. Fold the upper left corner and the upper right corner to the middle. 3. Then spread out the two corners of the previous operation.

4. Fold the two corners formed inside at this time outward. 5. Fold the upper left corner and the upper right corner inward.

6. At this time, notice that there is a more complicated operation. The openings on the left and right sides are unfolded as shown by thick white arrows, and the two small sides are folded up as shown by black arrows. 7. Turn the origami model over.

8. Fold the left and right corners to the middle. 9. It can be seen that the origami model now has two small corners protruding below. Fold these two small corners up.

10. Fold the triangular origami model to the middle. 1 1. Then turn the top corner of the origami model back.

12. Fold the left part of the origami model backward to form a double fold. 13. Then rotate the origami model clockwise.

14. Fold the paper on the upper surface of the origami model from right to left according to the position shown by the thick white arrow. 15. Then turn back the paper exposed at this time.

16. Then fold the lower left corner of the origami model once to make a crease. 17. Then turn the left corner up to form a small upturn.

18. Finally, draw the face of the hand-made origami puppy with a drawing brush, so that a complete hand-made origami puppy is ready! .

How to fold kittens, rabbits and puppies with paper?

The folding steps of the cute three-dimensional kitten are as follows: 1. 1 small note.

2.fold it in half. 3.fold it in half.

Open it. 5. Fold it.

6. The middle line, stretch it and fold it. 7. Open them all.

8. Fold according to the existing line. 9. Compaction.

10. Top open. 1 1. Divide the angle equally and press down.

12. Fold the upper ear in and flatten it, so that the whole body is flattened. 13. After both ears are ok, the lower body is also folded in half.

14. So, so is the other half. 15. Put the big head and the small head together and fold them back to lock the ears.

16. Fold the body and tail down. 17. The ratio is up to you. There is a seal on it. Open it.

18. Hold the tail. 19. Seen from the side.

20. Fold it to the back. 2 1 done.

The specific steps of three-dimensional dog origami are as follows: 1. First, fold a diagonal line. 2. Fold four bisectors with diagonal lines, and then fold a diagonal line.

3. Merge the four bisectors. 4. The middle corner of the paper is flattened upwards.

5. Fold the bisector of the middle paper corner in half (left and right are consistent). 6. Fold all the paper layers in half with the angle bisector, and fold the right mountain in half at the same time, and put it back as a whole (red line mountain fold and blue line valley fold).

7. After you put it away, that's it. 8. The upper corner of the paper is slightly opened and folded outward, and the distance is suitable to expose the small sharp corner of the ear.

9. The tail at the right end is folded to the left. 10. Fold the tail inward with the crease in the previous step.

1 1. The tail tip is folded back to the right. 12. Fold the paper layer of the front leg to the back along the ear mound.

13. The tail tip is upturned. 14. Align the paper corner of the head and fold it to the right, which is about half of the ear.

15. Fold off the sharp corners again. 16. Use the creases of the last two steps to make the inner W-shaped segment. 17. Fold the tip of the nose into the valley twice to form the tip of the nose.

18. The folding step is completed, and then three-dimensional shaping is started. If the paper is absorbent and elastic, it can be wet and shaped with a napkin.

Generally, the opening of the paper layer is glued to the head and back with white glue, and then pushed down. 19. The head bends inward, forming curves of eyes, back and legs.

20. Pay attention to the valley state of the head section. 2 1. A MengMeng puppy did just that.

The folding steps of the stereoscopic rabbit are as follows: 1. Fold the square paper diagonally, then open it and fold the fold line inward along the center. 2. Fold the two corners of the triangle to the center line.

3. As shown in the figure, fold the corners of two small triangles in half. 4. After folding, make the refolded side into a triangle, and then plug in the power supply. This step is to prevent rabbits from scattering easily.

5. Turn it over, as shown in the figure, and fold the triangle until both sides of the center line are symmetrical. 6. Fold back the redundant part to become the following figure. 7. You can see that there is a crease in the middle, then fold the two sides in half to align at the crease, turn in one direction as shown in figure 1, draw eyes and blow air into the rabbit's mouth.