:

1. Bending techniques

1. Expected shape: Before bending the honeysuckle bonsai, you must first think about how to shape it. With a clear direction, you'll know where to bend and which branches to ignore. If it is bent randomly, the shape of the plant will not look good. 2. Preparation materials: Generally, palm silk is used to bend honeysuckle bonsai. If not, you can use wire. However, in order to prevent metal wires from harming plants, kraft paper, plastic sheeting, etc. It needs to be protected. 3. Bending: Find the position that needs to be bent, fix it with brown wire, then rotate it in staggered ways, and tie the other end to the trunk. Control the bending angle and force to avoid breaking branches. If it is difficult to secure, you can nail a metal hook to the branch. 4. Note: In addition to damaging the epidermis of the plant, the wire may get stuck inside due to the growth of the plant, so the tightness must be adjusted regularly.

2. How to shape

The shape of honeysuckle is generally cliff-like or vertical, and the branches can also be bent and dry. Regardless of the shape, it should be done by pruning the branches, but don't prune too much at this time of the year, otherwise it will affect the flowering of the plant. After the shape is determined, the wires need to be tied and pulled. After the branches become lignified, the wires can be taken out.