The folding machine is a machine that processes the edges of products. And it is a simple bending machine that is not only manual but also motorized. The easiest way is to use a bending radius model to position the steel plate on the workbench, and place the excess material on another workbench. Then take the bending radius as the center and rotate the workbench. When the workbench rises, the folding machine will complete the stainless steel at a specific angle. So, how exactly should the folding machine be operated? Let the editor take you to find out.
How to use the folding machine
How to use
1. Wear tight-fitting protective clothing before operation, fasten the cuffs, do not open the hem of the top, and do not Wear, take off and change clothes next to the running machine tool, or wrap a cloth around your body to prevent machine strangulation. Safety helmets must be worn, and braids should be put into the hats. Skirts and slippers are not allowed.
2. Hemming workers must undergo certain professional studies and understand the structure and performance of the machine tool they operate and the correct method of installing the mold before they can operate alone.
3. Add lubricating oil before use and run the machine empty for two minutes to check.
4. After starting, wait until the operating speed is normal before starting work; at the same time, observe the dynamics of people around you to prevent injury.
5. Do not use this machine beyond specifications.
6. Multi-person operations should be directed by one person. When the workpiece turns over or advances or retreats, the operators on both sides should be in close contact and move in unison.
7. Welding scars and large burrs are not allowed on the material to prevent damage to the mold.
8. After the work is completed, cut off the power supply and perform machine maintenance and environmental cleaning.
In order to ensure better work bending accuracy. General matters that should be noted:
1. The sheet must be flat;
2. The bent sheet should be placed in the middle of the machine;
3. Correct The V-shaped groove of the lower mold should be selected, and the opening size should be greater than 8 times the thickness of the sheet;
4. The pressure of the machine selected and adjusted is basically similar to the bending pressure required for the work.
Adjustment method of this machine: When the accuracy of the bending work is high, lower the relief valve to the pressure required by the workpiece.
5. This machine adopts synchronous balancing mechanism. Filling and exhausting the synchronized cylinder with oil are effective measures to improve the accuracy of bending work. The steps: first turn on the oil filling switch, then turn on the venting switch, move the selector switch to the "Oil filling" position, press the "Oil filling" button, fill and exhaust the synchronized cylinder with oil, and after the air is exhausted, Turn off the bleed switch when filling. After filling, remember to turn off the filling switch.
The oil filling and exhausting of the synchronized cylinder should be carried out: ① between each start; ② during continuous operation, if the stroke number of the slider is found to slow down (<10min-1). To improve working accuracy and increase the number of slider strokes.
Okay, the above is how to use the folding machine and what to pay attention to. Maybe folding machines are rarely seen in our daily lives, so we have no concept of what a folding machine is. It can be said that our understanding of folding machines is zero. However, after the editor’s detailed explanation above, everyone should have a general understanding of the folding machine. Moreover, folding machines are now widely used. We should know something about folding machines, and if possible, have an in-depth understanding of folding machines.