Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - The technique of reversing on the road is better than the common technique of driving forward and parking on the side of the road.
The technique of reversing on the road is better than the common technique of driving forward and parking on the side of the road.
When you drive to the street, you often need to park temporarily on the side of the road. Try not to park your car in the non-motor vehicle lane, because parking in the non-motor vehicle lane is easy to be posted. It is ok to park in front of the commercial house like this on the left. I see a space between the white SUV and the brown SUV on the left front.

There is a step here, and all the cars on it have to go through it. There is also a snowy and icy road on the ground. Let me plan how to stop at this position first. If I drive up, I need to find a place to turn around ahead. As soon as I turn around, this parking space may be gone.

If you drive up, the front of the car faces inward, and you need to reverse when you come out. If you start after dark, it is difficult to reverse the car downhill in this place. I'm going to turn right in front and reverse the car, so that the parking space won't be taken away by the cars behind me. On the other hand, it is more convenient to drive directly when you leave at night.

Turn on the right turn signal, put on the forward gear, observe the right rearview mirror, and let the passing electric vehicles confirm that there is no influence of personnel and vehicles on the right side before moving forward.

And turn right, tilt the vehicle to the top of the green belt guardrail, and the rear of the vehicle faces the steps.

Put in reverse gear and play to the left.

Visually observe the right rearview mirror, and make the right rear corner of the vehicle reverse toward the right inside of the steps.

Looking back at the left rearview mirror, the left rear corner is also facing the left inner side of the step, ensuring that the left and right tires can be pressed onto the step at the step ramp position when reversing.

Turn left when reversing, so that the right rear corner of the vehicle leans to the body side of the rear white SUV.

Looking back at the left rearview mirror, pay attention to the uneven ground on the left rear. Although the distance between the cars on the left is relatively large, it seems that the screws for fixing the iron railings are still standing on the ground. Be careful not to press too hard, so as not to puncture the tire.

Continue to observe the reversing of the right rearview mirror, and pay attention to the corresponding relationship between the right trees and the right rear white SUV, so that the right side of the front of the car does not rub against the small trees, and the right rear corner does not push against the right vehicle.

Now the left rear wheel enters this low-lying position, and after making sure that the left rear wheel can't press the screw on the ground, hit the direction to the left.

The front bumper line is about to reverse behind the small tree, so you can start to turn left.

You can see that the vehicle made a slight arc to the left and backed into the parking space. Because the white SUV on the right side faces inward and the driver's position is on the other side, you can get close to it without affecting the driver's getting on and off. Because there are screws on the left ground, stay away from the left vehicle to prevent the screws from being accidentally pressed when getting off.

After reversing, you can see that this is a long-distance reversing uphill, avoiding the left ground screw and the small tree on the right to prevent the right vehicle from scratching. Seemingly simple, in fact, this operation needs to consider many aspects. Let me sort out a few key links for you.

First of all, the vehicle should go straight as far as possible, so that the rear end of the vehicle faces the ramp of the stairs, so as to ensure that the left and right tires are pressed onto the ramp at the same time, and the rear end of the vehicle faces the parking space after going uphill;

The second is to test insight, because there is an iron railing on the left rear, so it is judged that there are screws on the ground. If you are not careful, you may not see them. If you don't see them, you may bump into them and puncture your tires.

The third is to grasp the relationship between the right small tree and the right car body, because before reversing, the car body leans forward, left and right, the vehicle should stop carrying, and the rear of the car should swing to the left after going up the steps.

In this way, the right side of the car body should keep a distance from the small tree at first. If you get too close, the rear of the car may scratch the right side of the car when it leans to the left.

Ok, after parking, let's look at the front, back and left. The distance on the left is relatively large, and the screws on the ground in front are clearly visible.

The right side is slightly closer, but the driver does not affect each other up and down;

Looking ahead, the position of the front of the car is also very reasonable. Look at the ground, the ice is melting.

The front of the car is now facing the ramp up the steps, so it is more convenient to come out at night.

This article comes from car home, the author of the car manufacturer, and does not represent car home's position.