1. Before pasting, first make sure whether the working environment meets the requirements of dry and less dust, otherwise dust and sundries will enter during work, which will affect the pasting effect. It is recommended to wash the car before pasting.
2. Cover the necessary position of the vehicle, and both inside and outside should be protected by protective sleeves. If there is no special material, you can also choose plastic wrap.
3. Clean the car glass that needs to be coated, pay attention to the top and edge position of the glass, and then dry the water.
4. The next step is to cut the car film, and pay attention to the size of the car film to match the glass. Spray a little water on the glass surface, then stick a plastic film with a certain thickness on the window, and then draw a template according to the edge. There are a little more templates than glass.
5, before and after the windshield film, you also need to bake the film to finalize the design. Cover the cut car film on the outside of the glass, and then shape it with a hot air gun. This step is also a key and error-prone link, because the temperature and setting method of hot air gun are very demanding, otherwise improper use will easily lead to black car film or broken glass.
Tip: The key to baking film lies in "high temperature and high speed". Turn the temperature of the hot air gun to a high level, and the wind speed to a high level, and then shake the hot air gun like we use a hair dryer to blow our hair. We can't stay in one position for a long time.
6. After baking the film, you can officially film it. Spray the inner glass with clean water or window film installation liquid, then tear off the innermost plastic film of the car film, and then stick the car film on the inner glass and move it to the most suitable position.
7. Spray some clear water or window film installation liquid on the surface of the car film, and then catch the water with the Yangtze River Delta plastic scraper. If you don't have this tool, you can take useless hard cards (bank cards, membership cards, etc. ) on the contrary.
8, after the completion of water, check whether there are bubbles between the car film and glass, paste is firm, whether there are folds, whether there are scratches, etc. If there is no problem, finally wipe the water on the edge of the glass with a towel.