After driving the vehicle to the 4s shop, the maintenance master should determine the maintenance plan according to the damage degree of the vehicle, and then start painting the body. Different solutions will be adopted for different degrees of depression.
After determining the appropriate repair scheme, the deformed parts are cut, polished, stretched, sealed and oxygenated. The sheet metal repair of automobile is not only to restore the original appearance of the vehicle, but also to maintain the hardness of metal materials as much as possible. At this point, the requirements are still relatively high. After the sheet metal is corrected, the mechanic will reshape the waistline of the car body and adjust its flatness by scraping and shaping the car body.
Matters needing attention in body panel repair
It should be noted that the car paint is not completely dry after painting. If you encounter water, it will affect the paint surface, so try not to touch water a few days before washing the car until the paint is completely dry.
After maintenance 1-2 days, avoid direct sunlight and try not to use it: we will use it when the paint is wet. Temperatures such as sunlight and engine heat may crack the paint surface. It is best to put the car in a ventilated and cool place to dry naturally.