Sheet metal hammer?

There are many kinds of hammers for sheet metal. Different hammers and different materials have different uses.

Parallel lines

Used in conjunction with various sheet metal hammers to provide support for steel plates when knocking. Steel plates can also be formed from the back.

Pull the needle?

You can make a "mark" on the metal plate. Before repairing the rib line, mark it with a marking needle, so that the repaired rib line will not "run off"

badminton racket

Used to repair the rib line, and the repaired rib line is straight.

straightedge

A seemingly ordinary ruler can easily judge whether the surface of a steel plate is flat or not through a "crooked" and a "ratio" in the hands of a sheet metal master.

Prying lever

Using the lever principle, the depression can be roughly shaped in the plate from the inside out.

Using optical principle and lever principle, the vehicle can be repaired by painting without damage, and the "small bump" no longer needs a complete set of sheet metal painting.

Flexible file

By observing the file marks, it is convenient to check the protruding part on the plate and facilitate the subsequent leveling and repair by the sheet metal master.

heavy-duty machine tool

Pneumatic abrasive belt machine

Old paint layer used to polish corners.

Angle grinder?

There are two kinds of electric and pneumatic, with the same function. It can be used in conjunction with the black diamond polishing board to quickly polish the old paint layer on the board without damaging the galvanized layer of the original car.

Small paint rust remover?

Mainly used to remove rust on steel plates.

Pneumatic glue gun

It can be used for bonding and sealing after the accident car is repaired, and has the functions of anticorrosion and waterproof. Through the nozzles with different opening shapes, the appearance texture of the glue punched by the pneumatic glue gun can be roughly similar to that of the original sealant.