1. The steps of jadeite polishing are as follows: passing the oilstone: first, rough polishing the jadeite surface with small oilstone. Moss: It is probably polished to make the jade surface look delicate and beautiful. Nailing: As shown in the figure, the tool is stained with diamond powder carving details.

2, jade polishing can be coated with polishing powder first, and then polished with abrasive tools such as sandpaper and grinding wheel, which can make jade look more moist. Then use brush tools to polish the jade surface, and finally carefully polish it with kraft paper.

3. The purpose of the sixth cleaning process is to clean the polishing powder and residue on the polished jadeite. It is mainly cleaned by ultrasonic machine, and the parts that cannot be cleaned are wiped with alcohol. Many carefully carved products are slightly warped in potholes, and toothpicks are often used.

4. Put a layer of paste polishing powder on the carved jade. Use a 2000-mesh grinding wheel to polish the jade surface. Repeat the first two steps more than twice. After polishing, coat the surface with a layer of diamond powder, and then brush it with a hard brush.

5. When you polish the jadeite yourself, you can first coat a layer of polishing powder on the jadeite wool, usually green polishing powder or colorless polishing powder. Then use a 600-2000 mesh grinding wheel to polish the surface of the jade wool product, and repeat this step for 2-3 times.

6. The first process of jadeite polishing is polishing. After a large area of jadeite is polished, a layer of polishing powder is coated on the surface of jadeite. After that, the burr on the jade surface is removed with an oilstone, and this process is repeated for 2 ~ 3 times. Then, a layer of diamond powder is coated on the jade surface and polished with a hard brush.

How to polish jadeite, polishing technology

The steps of jadeite polishing are as follows: passing through the oilstone: firstly, roughly polish the surface of jadeite with small oilstone. Moss: It is probably polished to make the jade surface look delicate and beautiful. Nailing: As shown in the figure, the tool is stained with diamond powder carving details.

Jade polishing can be coated with polishing powder first, and then polished with abrasive tools such as sandpaper and grinding wheel, which can make jade look more moist. Then use brush tools to polish the jade surface, and finally carefully polish it with kraft paper.

Through the oilstone. Just polish it with a small oilstone first. Emerald state after passing through the oilstone: "green silk" on the steps. Steps of preparing diamond powder. The step is to dip your nails in diamond powder to make carving details. The nail effect diagram on the steps. Steps to prepare sandpaper.

The first process of jadeite polishing is polishing. After a large area of jadeite is polished, a layer of polishing powder is coated on the surface of jadeite. After that, the burr on the jade surface is removed with an oilstone, and this process is repeated for 2 ~ 3 times. Then, a layer of diamond powder is coated on the jade surface and polished with a hard brush.

How does jadeite polish jadeite and shine?

The steps of jadeite polishing are as follows: passing through the oilstone: firstly, roughly polish the surface of jadeite with small oilstone. Moss: It is probably polished to make the jade surface look delicate and beautiful. Nailing: As shown in the figure, the tool is stained with diamond powder carving details.

Jade polishing can be coated with polishing powder first, and then polished with abrasive tools such as sandpaper and grinding wheel, which can make jade look more moist. Then use brush tools to polish the jade surface, and finally carefully polish it with kraft paper.

Polishing means coating a layer of polishing powder on the surface of the carved jade ornaments, and then grinding off all the burrs on the surface with oilstone or sandpaper. Because there are many tiny burrs on the surface of jade, this grinding process is more troublesome, and this action must be repeated at least twice.

If jadeite is not finely processed, it can be polished with polishing powder and a small mill (or polished by hand with fine sandpaper). For more delicate jadeite, it is advisable to polish it slowly and carefully by hand. You can also pour the polishing powder into water, stir it into a paste, coat it on the jade surface, and then polish it with leather.

Thin slices are called grindstones. Of course, jadeite grinder and oilstone grinder may be different. 2. In the second process, the green silk is to polish the surface with a grinding wheel and push it repeatedly. The second process is often coated with dye first, which can't be washed off. The function is to know which one has been ground and which one has not. Polishing powder is also indispensable.