2. In the offset position, the tool hook cannot extend from one side. You can remove the door, and you can find the right tools to prepare the door.
3. Remove some fixing screws hidden in the inner panel, and then destroy the inner panel evenly. The internal maintenance team consists of 3 people and 5 people, because the average maintenance experience of shark skin dent repairers is more than 3 years. Please delete it. If you do this yourself, please be careful not to break the buckle.
4. The next step is to remove the wire harness. Remember the original position of the harness and the corresponding interface. Don't open it when it's cold. I don't know when it was installed. Please remember clearly.
Basically, you can disassemble the internal structure and take back the hook, but this is usually enough. Find the iron mounting bracket during maintenance and fix the door to prevent it from moving back and forth.
6. Then, extend the hook to the other side of the dimple, and observe the change of dimple in real time by using the light emitted by the lamp board. The towel in the photo is used to protect the door. There are strict maintenance procedures and protection schemes to ensure that the car will not cause secondary injuries during maintenance.
7. After reaching a certain level, please use a hammer and a special wooden pen. The pen in the photo is made of Indian sandalwood. It won't scratch the car paint, and it will knock back and forth until the dimples are mixed with the car paint.
8. It is basically invisible to the naked eye, but it has not yet reached the standard. It will be done well after repeated several times. This is the way to repair the dent in the car door.