Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - How is the aluminum gusset buckled?
How is the aluminum gusset buckled?
Aluminum gusset plate is a commonly used ceiling material, its disassembly and installation are relatively simple, but it needs to master certain technology, otherwise it will easily lead to damage of aluminum gusset plate, so how to fasten it? Let's get to know each other with Bian Xiao.

How is the aluminum gusset buckled?

1. If you want to fasten the aluminum gusset plate, first observe the structure of the aluminum gusset plate in detail. There is generally a groove in the middle of the elevation position of the four sides of the aluminum gusset plate. Then you should look at the light steel keel used for the aluminum gusset ceiling. A square frame composed of light steel joists usually has a small cornice at the bottom. The groove on the aluminum gusset plate is generally opposite to the small cornice on the light steel keel.

2. Next, you should check whether there are patterns on the surface of the aluminum gusset plate. If there is, it should match the pattern on the top. Then hold the edge of the aluminum gusset plate by hand, and at the same time forcibly push the aluminum gusset plate into the frame formed by the light steel keel, so that the small cornices on the light steel keel are clamped into the grooves on the aluminum gusset plate, and the periphery of the aluminum gusset plate can be kept in the same horizontal position with other plates.

3. After fastening the aluminum gusset plate, ensure that the whole plane of the aluminum gusset plate is flat and the gap between the aluminum gusset plates is vertical. In order to avoid hurting fingers, it is recommended to wear gloves when buckling the aluminum buckle plate. If you accidentally leave a stain on the surface of the aluminum gusset plate, clean it with water in time. When fastening the aluminum gusset plate, it is best not to tear off the protective film to avoid accidentally scratching the surface of the aluminum gusset plate.

4. If you want to remove the aluminum gusset plate, you can buy a sucker first, then suck the sucker in a corner of the aluminum gusset plate and pull it down hard. At this time, one corner of the aluminum gusset plate will be tilted, and then the other three corners of the aluminum gusset plate will be removed from the light steel keel in the same way, so that the whole aluminum gusset plate can be removed.

The above is a detailed introduction on how to buckle the aluminum gusset plate, hoping to help friends in need. Aluminum gusset plate is a kind of ceiling material with good moisture-proof, oil-proof, flame retardant and other characteristics. It has elegant appearance and convenient installation, and is a good choice for kitchen ceiling.