Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - Working principle of kv8 cleaning robot
Working principle of kv8 cleaning robot
Working principle of KV8 cleaning robot

1 and KV8 cleaning robot path planning principle

KV8 cleaning robot controls the rotating speed of the left and right wheels of the robot through a computer chip to realize an arc cleaning route. When the radius of the arc extends to 7.5m, the chip program will control the robot to leave the current route, and perform the arc cleaning route again at a distance of 7.5m. A large number of arcs cover the ground seamlessly, thus achieving the goal of comprehensively cleaning the ground.

2.KV8 cleaning robot automatic charging principle

When the KV8 cleaning robot is about to run out of power, the infrared emitting hairs at the top of the robot do not emit electrical signals. When the two infrared receivers on the charging base receive the signal, the robot contacts with the charging base. Guided by two infrared receivers, the robot can approach slowly and finally realize docking.

3, KV8 cleaning robot anti-falling principle

KV8 cleaning robot is equipped with four pairs of infrared sensors at the front of the robot bottom, each pair of sensors contains a transmitter and a receiver. The infrared ray emitted by the infrared emitting head is emitted by the ground and received by the corresponding receiving head. If the height of the bottom of the robot is more than 5 mm from the ground, the computer chip will control the robot to retreat and adjust the walking direction to avoid falling from the sky.

4. The working principle of 4.KV8 cleaning robot virtual wall.

When the virtual wall of KV8 cleaning robot is opened, it will emit infrared rays 0.5m to the left and right and 3.5m to the front. The 2 1 infrared sensor on the KV8 robot will not move forward and enter the area for cleaning after contacting the infrared emitted by the virtual wall.

Power: machine 23W, charger 8W. The rechargeable battery is a nickel-chromium alloy. The appearance material is ABS engineering plastic. Power supply of virtual transmitter: two 1 D batteries or two 1.5V dry batteries (two 1 batteries). The maximum power span (the longest distance) is 72 hours, and it can be used for 6 months if it works 1 hour every day.

KV8 cleaning robot parameters

Power: machine 23W-45W, charger 8W. The rechargeable battery is a nickel-chromium alloy. The appearance material is ABS engineering plastic. Power supply of virtual transmitter: two 1 D batteries or two 1.5V dry batteries (two 1 batteries). The maximum power span (the longest distance) is 72 hours, and it can be used for 6 months if it works 1 hour every day.

Scope of application: home, office and computer room, which can effectively clean all kinds of wood floors, cement floors, tile floors and short wool carpets. The machine is guaranteed for half a year and the battery is guaranteed for one year. The deformation of the side brush and the deformation in the packaging process can be twisted in the opposite direction.

Features and functions:

Features: saving time and effort, purifying air, low noise, super suction, light and compact, comfortable and safe.

Functions: Intelligent computer system, automatic spiral navigation system, memory system, 2 1 sensor. The four functions of sweeping the floor, wiping the floor, vacuuming and purifying the air are cleaned synchronously.

The difference between KV8 cleaning robot and ordinary vacuum cleaner;

(1) Time-saving and labor-saving: the whole cleaning process needs no manual control, which reduces your operating burden and saves time for watching TV and spending time with your family.

(2) Low noise: less than 50 decibels, and there is no noise in the process of cleaning the room.

(3) Air purification: The built-in activated carbon absorbs harmful substances in the air, and the dust purification rate is as high as 96%, and the cleaning efficiency is 100%.

(4) Lightweight and compact: easily clean the dead corners that ordinary vacuum cleaners can't clean.

Main components of KV8 cleaning robot:

Front: infrared connector, handle, low battery indicator, start button, trash can.

Back: rechargeable battery, side brush, dust box and filter screen.

Side: power switch, charging interface.

How to use KV8 to clean robots;

Charging: the first charging must be 8 hours, and the whole charging time is about 4 hours, which can last about 1 hour. The battery can be recycled for 800 times, and normal families can use it for about 2 years.

The size of the room can be chosen by yourself: in the small stall, Zhiduoxing will move repeatedly in a spiral within the diameter of about 3 feet, and concentrate on cleaning a certain place for about 4 minutes. This mode is suitable for cleaning the local dirty ground in the room; Mid-range, Zhiduoxing will automatically clean the room and work for about 30 minutes. This model is suitable for small rooms; The large Zhiduoxing will run until the power is completely exhausted, and the working time is about 60 minutes. If the automatic charging cradle is used, Zhiduoxing will automatically search and return to the cradle for charging. The low battery indicator is red.

Work: The robot will run in different modes. If you lift the Ann while the machine is working, it will stop automatically after three seconds.

The side scan and side brush can be replaced. Infrared rays emitted by the virtual wall transmitter will not harm pets. The virtual wall formed by the infrared rays emitted by it can be up to more than 3.9 meters wide, and the effective distance (length) has three levels: 0-3 meters, 3-7 meters and more than 7 meters.

Wet and greasy, the floor can be cleaned.

Frequent switching will not affect the service life of the machine.

Cleaning the machine:

1. Clean the following parts with a dry cloth every time the machine is used: garbage bin; Left and right wheels; Turn the middle brush at the bottom by hand to clean the dust on the brush; Clean and shape the side brush; Open the dust cover and clean the dust collection room and fan; The four sensor heads at the bottom of the front case should be wiped clean with a clean cloth.

2. The filter is a nano-filter, which can be washed with water. Don't expose yourself to the sun after washing, but put it in a cool place to dry.

3. Generally, it takes about 1 month, and the brush in the middle should be opened for cleaning.

Precautions for KV8 cleaning robot:

1. Turn off the power after use and take out the battery in the virtual wall transmitter. 2. During walking, the vacuum cleaner may knock over some light and small objects, such as vases and small cartons. Please take care to remove such items before cleaning.

3. When using the virtual wall launcher, don't aim the launcher at people's eyes.

The vacuum cleaner turns on and off immediately after a piece of music. The battery may be low, please charge it in time.

5, smart vacuum cleaner can't walk on the long-haired carpet, in case of getting involved in silk hair.

6. There can be no filamentary objects, wires, towels, etc. where the smart vacuum cleaner may pass. Prevent being sucked by the vacuum cleaner and winding the brush.

7. If you don't use the battery for a long time, please take it out after it is fully charged and put it in a cool and dry place.