● Frame structure with good rigidity; High precision; The four-column structure is simple, economical and practical.

● Hydraulic control adopts cartridge valve integrated system, with small impact, reliable action, long service life and few leakage points.

● New cylinder seal, high reliability and long service life.

● Stretching and blank-holding sliders can be integrated to realize single-action process.

● Guide rail automatic lubrication device.

● Electromechanical integrated safety device. For example, the supporting circuit of the lower cavity of the oil cylinder and the interlocking circuit of the upper and lower cavities of the oil cylinder have superior safety.

● The electrical system is controlled by PLC.

● It can realize two molding processes of constant pressure and fixed distance, and has the functions of keeping calendering time and adjusting delay time.

● The working pressure and stroke can be adjusted within the specified range according to the process requirements, and the operation is simple.

Suitable for all stretching, bending and forming processes.

● Covers and other parts of large cars and agricultural vehicles.

● Boiler head, liquefier tank, stainless steel hand washing tank, bathtub, etc.

● Ships, aviation, aerospace and other fields.

Optional accessories or functions:

● Mobile workbench

Low blanking buffer device

● Pressure regulating devices at the four corners of the blank holder slider and hydraulic pad (stretching asymmetric parts)

● Photoelectric protection device

● Floating guide rail and die changing rolling support.

● Quick clamping mechanism of mould

● Numerical control device with digital display of stroke, pressure and speed.

● Touch the industrial display screen.

● Heating and cooling devices of hydraulic system.

Stretching hydraulic press of Y27 series single-acting sheet metal.

It is mainly used for the stretch forming process of large-scale sheet covering products, and can also be made of plastic materials.

Bending, blanking, correction and various crimping and compaction processes, the main body of the hydraulic press adopts three-beam and four-column structure or frame structure, and the three-beam and four-column structure.

Type A adopts four-nut locking mode, and the hydraulic pad is connected with the ejector cylinder in the lower workbench. In order to improve the ability to resist unbalanced load, the hydraulic pad adopts eight guide rails, which mainly

The main components are welded steel plates, the transmission on the slider is in the form of single-cylinder or multi-cylinder pressurization structure, and the slider is guided by the movable beam or eight guide sleeves above and below the movable beam.

Guided by the four-corner octagonal guide rail on the slider, the production tonnage is100t-3000t (1000kn-30000kn).