The following is about "what should I do if the front cross beam of the car is deformed?" Related introduction:

Correction method of automobile girder;

1, equipment preparation. First of all, we need to prepare equipment for correcting the girder. Beam leveler, several fixtures, a small hammer, a medium hammer and several tools, then check whether the beam leveler is clean and free of sundries, and then drive the damaged vehicle to the beam leveler;

2. Fixation of the vehicle. Fixing four tires of the vehicle with a clamp to prevent the vehicle from being dragged during the stretching of the main beam, rotating the straightening and stretching arm to the position of the main beam, and then fixing the next one with a clamp pin to prevent the stretching arm from shaking in the stretching process, so as to fix the straightening and stretching arm with the main beam;

3. Determine the deformation degree of the main girder. For slight, we just need to stretch in the opposite direction of deformation. At the same time, find a measuring point on the car body, measure the diagonal lines with a box ruler, and stop when the two diagonal lines are stretched to the same length.