It is best to set the frequency doubling and external frequency directly!
1, boot into the BIOS, and press CTRL+F 1 to open the overclocking hiding option;
2. Input MB smart trimmer (M.I.T).
3. Set the CPU host clock control to enable; ;
4. Set the CPU host frequency (MHZ) to 400;
(Set the external frequency to 400, generally 6320 can be used for 400 external frequency);
5. Set the PCI Express frequency (MHZ) to101;
(It is very important to lock the PCI-E frequency. If you don't lock the PCI-E frequency, you may not be able to boot next time. )
6. Set the system memory multiplier to 2.0;
(Set the ratio of memory frequency in the external frequency domain. The minimum memory frequency of the 965 motherboard can only be set to 2. At this time, the memory frequency is 400X2=800MHz, which ensures that your memory can run under DDRII 800. )
7. DIMM overvoltage control
Memory voltage setting: generally, the safe range of memory voltage is below 2.2V, and the default value is 1.8V, and it is recommended to be below +0.2v;
8. CPU voltage control
To set the CPU core voltage, it is recommended to set it manually instead of automatically. Generally, if E6300 exceeds 400, the voltage can be slightly reduced and the CPU temperature can be lowered. I just lowered the core voltage to 1.3V (the default is 1.325V). If your RP is good, the setting can reduce the voltage to about 1.2V, and the cooling effect is obvious.
9. Memory parameter settings
Generally, the voltage of DDR II 667 brand memory running DDR II 800 is less than 0.2V, so it is no problem that the safety parameter for running DDR II 800 is 5-5-15, that is, the first four parameters of the memory are set to 5, 5, 5,15 respectively, and the following parameters should not be changed.
10, ok, now save the settings just now and restart. If it lights up smoothly, congratulations, the meat buckle has been overclocked successfully; Otherwise, the system will return to the default settings for starting the machine.
1 1, over.