1, hard gel water setting. This method is mostly used for small and medium-sized ornaments, and it is a common shaping method. Specific method: (1) dilute gel water. Line 5 #-6 # is used for decoration, and the dilution ratio is 2: 1 (2 parts of water). 3 #-4 # knot, the ratio is 1: 1. The 2# junction setting needs no dilution. You can also adjust the proportion appropriately according to your needs. (2) Put the adjusted knot flat on the white paper, face down. Note that if printed paper or colored paper is used, it is easy to get dirty. (3) Brush the gel water evenly on the back of the knot with a small brush. Be careful not to rub it on your ears, or nothing will happen. (4) Tidy up the shape of the external ear and knot it by hand. If the outer ear or long sleeves are uneven, they can be slightly fixed with a bead needle to keep the shape. (5) When drying quickly, take out the bead needles, slightly arrange them, flatten them and dry them.
2. Stitch and shape with needle and thread. This method is mostly used to fix the decorative knot or ring connection of the frame, so that the whole decorative knot is shaped. Pay attention to two problems. First, the thread end or pull wire must be hidden in the knot; Second, the stitching points are different. The stitching point of the border decorative knot should be slightly wider to play a fixing role. For example, the decorative knot on the border of a long decorative plate is fixed in this way. But the eight long knots around the main knot are decorated with eight loose knots, and only one seam can be used to sew adjacent ears at a time.
3, add bones and muscles to shape. Mostly used for long-term text editing or pattern modeling. Select appropriate length and thickness of iron wire, and reinforce and fix it. The method is to insert the wire into the stroke or the required part. Tidy it up to meet the needs of stereotypes.
The second kind of knitting is stereotyped. Mostly used to weave thick knots. Choose the iron wire the thickness of chopsticks and weld it into a box as needed. For example, weave a big long knot with 2# thread, and weave it loosely. After weaving, insert the box into the knot first, and then tie it tightly to complete the modeling. The box played a role in shaping. Can be used with gel water.
The third is pre-editing. Used for forming fine gold and silver wires.
1, thin copper wire shaping. Used for weaving loose gold and silver thread. Drawing 1 fine copper wire from the conductor and inserting it into the gold and silver thread to weave butterflies or dragonflies is the way to complete the shaping. This is a way to borrow flower buttons.
2, color silk stereotypes. Colored silk is a kind of material for screen flowers, and it is a thin iron wire wrapped in colored paper. There are many sizes and colors. Mostly used for weaving small ornaments. For example, a note attached to the bottom of a rose corsage is made of gold wire inserted into a flat gold wire in the shape of a note.