Characteristics of water-based putty products: water-based products, environmental protection, firm waterproof, moisture-proof, batch scraping flat, simple construction, fast drying, easy polishing, strong adhesion, high hardness, which can effectively improve the paint effect, and its comprehensive performance is far better than that of ordinary putty and pig blood ash. Good polishing performance, saving paint and other accessories. Putty with a weight of 5kg/ barrel can be scraped twice in thin batches on the material of about 80 square meters in different periods, polished and dusted, and then sprayed with topcoat, with good results.
Application field of water-based putty: it can be used as the base material of wood paint for interior decoration, such as white paint and solid color paint, and can also be used for ceiling and indoor wall hanging. , which can solve the phenomena of foaming, cracking and peeling of paint surface caused by insufficient tension of hard bottom and adhesion of primer or wet wood. Fill and modify the defects such as pits, pinholes, cracks and small welds on the substrate to ensure the smooth surface of the substrate before painting. Widely used in train manufacturing, shipbuilding, bus manufacturing, engineering machinery manufacturing, machine tool machinery and equipment manufacturing, automobile repair, furniture, molds, concrete construction and various metal products, wood products, glass fiber reinforced plastic products and other fields that need to be filled and repaired.
Introduction to the use of water-based putty
1. Select or allocate putty with corresponding color, and directly fill the gaps, holes, nail holes and scratches with putty knife. Deep holes can be filled in layers and dried layer by layer.
2. 1KG water-based putty is used for filling holes, facing and backing wood. 1kg water-based putty can be mixed with about 300-400ml water to the required consistency and coated on the surface with a putty knife, cloth, brush or roller. If the putty is too hard, it can be heated to the required concentration with water or a small amount of cold water.
3. After the pore filler is completely dried, polish it with 180-240 mesh sandpaper. Polished putty can be recycled, and tools or hands can be washed with water.
4. Waterborne putty has strong heat resistance. After construction, infrared rays, heating lamps or drying rooms can be used to shorten the drying time. Of course, it can also be dried naturally.
Construction reference and matters needing attention of water-based putty
The construction surface must be cleaned. (such as oil stain and floating dust), if this product is too thick, add a small amount of water and mix well before construction. Remember to add its ingredients by mistake. The remaining products should be tightly covered, stored in a cool and dry place where children can't get it easily, and can be used again when needed next time. There are many application fields of water-based putty, and there are also many details that need to be paid attention to during use. The above contents are introduced in detail for future reference. I hope that after reading the above contents, you can have an understanding and understanding of water-based putty.