The trunk of pine trees should be shaped according to the whole before bending. Before bending, the residual limb should be fixed and not shaken. The torso should be wrapped with a small piece of cloth rope in the same direction as the bending direction. The broken bar should be broken vertically in a cross shape, and the broken bar parts should not overlap. After the rod is broken, wrap the wound with film and wait for healing.

Method of bending pine

There are many things to pay attention to when bending the trunk of pine trees. First, we should look at the growth trend of pine trees, including the distribution pattern of each branch, and then consider how to bend the trunk. The deformed shape should be consistent with the original place where the residual roots were unearthed, so as to form a whole and achieve the ideal effect.

Fix the residual limb before bending, without shaking. Slight shaking will affect the final molding. When holding the bend, open the pliers and break the pole in the middle of the trunk into a cross vertical shape. The positions of broken rods should not overlap, but should be connected in series. If you are in the same position, it will expand the influence impression.

The position of the loosening rod and pliers should be wound with a short piece of cloth rope, and the winding direction should be consistent with the bending direction to avoid and prevent the breakage. After bending, wrap it with cloth or film again to avoid bacterial infection, affect the healing of the main wound in the later stage, and make the pine tree unable to grow normally.

After bending, the pine trees should be maintained, the branches on the stumps should be trimmed in time, and the leaves should be sprayed with water to keep the soil moist and avoid direct sunlight, so that the pine trees can be placed in a semi-shady environment, which is conducive to restoring tree growth. Pay attention to these points, the bending of pine branches is basically no problem.