2. Clean the glass, clean the glass that needs to be pasted, especially some tiny dust, which must be cleaned up, otherwise it will affect the pasting effect.
3. After cleaning the glass, dry all the water on the glass with a clean lint-free absorbent cloth without leaving any water drops.
4. Tear off one side of the film package to be pasted, and paste the film on the other side facing the calibration glass. When pasting the film, the position must be aligned, and it is best to paste it in the right position at one time.
5. Use a special plastic scraper to scrape the attached film flat. If there are small bubbles, you can also scrape them off the car film with a plastic scraper.
6. Finally, tear off the other side of the automobile film package. After drying, the car film can be firmly adhered to the glass, and the film is successful.