Small inspection stations are generally equipped with two environmental protection lines, a security inspection line, a factory building with an area of about 8000- 10000 square meters, a road test runway with a length of 100 meters and a width of more than 3 meters, two parking ramps with a length of 10 meters, and an area of about 1000 meters.
Requirements for investment approval of automobile inspection station
1. equipment: according to the level and tasks undertaken, the testing station is equipped with corresponding testing equipment, and can also be equipped with testing vehicles with corresponding functions. The inspection of bai testing equipment or vehicles shall be carried out by the Quality Supervision, Inspection and Testing Center of Automobile Warranty Equipment of the Ministry of Communications for type identification and regular announcement.
2. Personnel: On-site management personnel should have a college degree or above and hold an engineer certification certificate; The person in charge of technology and quality should have the corresponding intermediate technical title; Inspectors must be trained and assessed by the local traffic department (bureau) and can only take up their posts after obtaining the certificate.
3. On-site: the testing station should have various testing capabilities; The vehicle exit of the checkpoint shall not hinder road traffic; The inspection room shall be spacious, bright and clean, with intact equipment and complete safety protection facilities; The parking lot of the inspection station shall not be less than the area of the inspection room.
4. Management system: The inspection station must establish various rules and regulations that meet the requirements of quality supervision, such as inspection equipment management system, inspection equipment operation procedures, post responsibility system for staff, employee code and file management system.