I am Nantong Meidifeng Electromechanical Co., Ltd., specializing in the production of electric tools. \x0d\ can be removed during installation. Am I not sensible enough to take off the enameled wire on the stator or the whole stator? \x0d\ Leave him alone and give you the answer! \x0d\ 1, if the enameled wire can't come down, you have to cut off all the wires at one end with a saw, and then knock it off from the scrapped side with a screwdriver and hammer. \x0d\2. If the stator can't be taken out, first check whether the screws have been removed, and then see if the casing of the rotor stator is deformed after being burnt out due to high temperature. If so, you should replace the casing, so you should know how to deal with it. Moreover, it is not the first two questions. You have to heat up the whole stator and casing in the oven and help him take it down. Because many manufacturers heat the casing before installing the stator when installing the machine.