2. The deformation of asymmetric injection mold is also the result of the comprehensive action of thermal stress and organizational stress. For example, the thin-walled die has thin edges, because the die wall is thin and the temperature difference between inside and outside is small during quenching, so the thermal stress is small; However, it is easy to harden and the tissue stress is large, so deformation is easy to swell the cavity.
3. In order to reduce the deformation of the injection mold, the heat treatment department should work with the mold design department to study and improve the mold design, such as avoiding the mold structure with different cross-sectional dimensions, striving for a symmetrical mold shape, and adopting the assembly structure for complex molds.
4. When the shape of SINO injection mold cannot be changed, some other measures can be taken to reduce the deformation. The overall consideration of these measures is to improve the cooling conditions so that all parts can be cooled evenly; In addition, various compulsory measures can be assisted to limit the quenching deformation of parts.