Current location - Plastic Surgery and Aesthetics Network - Plastic surgery and medical aesthetics - How to understand the matters needing attention in Wuhan cement paint wall construction
How to understand the matters needing attention in Wuhan cement paint wall construction
In general, it should be brushed before the finished product is really finished. With the development of furniture industry, it has become a part of our innovation. So what are the preventive measures for Wuhan cement paint wall construction? What are the construction skills of Wuhan cement paint wall?

Matters needing attention in Wuhan cement paint wall construction 1. Prevent metal pollution: When using wood paint, the hardware must be packaged so that the wood paint will not corrode the hardware. Therefore, in the process of painting, paper spraying or single-sided adhesive tape can be used on hardware, so that there will be no further problems and expenses.

2. When looking for matching products: when using wooden furniture, use water-based wood paint and mix water in proportion. However, if you use nitrocellulose paint and polyurethane paint, we will make them at a certain speed.

3. After the paint is mixed, it must be filtered: when the wood paint is mixed with dust, it will form small particles. So in this case, the surface will not look smooth and flat. Therefore, after the wood paint is evenly mixed, it needs to be filtered again to make the construction effect more beautiful.

Wuhan Cement Paint Wall Construction Technology 1, Pre-dust removal: Before painting the wall, we need to use sandpaper to smooth the surface. Then wipe it repeatedly with a special dust-proof cloth. Avoid leaving a little dirt on the wood.

2. Painting method: When painting the wall, the paint should not be too thick; If the paint is too thick, it may be troublesome to replace the residue on the lower part. So we must first coat it with a thin layer, and then repeat the construction to get the desired effect. In addition, if you have a multi-layer coating structure, you should wait until the sub-layer is dry and trim it before each reconstruction.

3. Appropriate temperature configuration: Be careful not to operate at low temperature or high temperature during wall construction. For example, when the temperature is low, white fog and extinction will occur during construction. If the temperature is high, drying will happen too fast, leading to pinholes or bubbles, which will directly affect the construction quality.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~