The college actively carries out school-enterprise cooperation and cooperates with Falc Handicraft Association to carry out teacher training; Cooperate with Bosch (Shanghai) Trading Company in Germany to train automobile diagnostic technicians and set up "Bosch class"; Cooperate with Shanghai General Motors Company to open a "general class"; Cooperate with Beijing Hyundai Motor Company to open a "modern class"; Cooperate with Akzo Nobel and PPG coating enterprises to promote the construction of coating specialty; Cooperate with Pentium Company to promote the construction of sheet metal specialty. Zhu Jun, a senior engineer of Automotive Application and Service Branch of China Automotive Engineering Society and a well-known professional education expert, was also hired as honorary president of the college to guide the teaching of automotive specialty. Cao Hua, the technical director and senior CNC technician of the fourth branch of Inner Mongolia No.1 Machinery Group, was employed as the instructor of mechanical processing specialty in the college. The college is the executive director of the Technical Education Branch of China Communications Education Research Association, the executive director of the National Vocational College Ideological and Political Work Research Association, the executive director of Zhejiang Communications Education Research Association, the executive director of Zhejiang Automobile Maintenance Industry Association, and the vice president of Zhejiang Automobile Driver Training Association. In 2006, the College became a civilized unit in Zhejiang Province.
College is a fully funded institution in Hangzhou. Not only the salaries and benefits of the teaching staff are fully allocated, but also 6 million yuan of teaching equipment is allocated every year. At the same time, the college is also listed as a local mobile financial construction fund arrangement unit in Hangzhou, with a certain amount of construction funds every year. Since 2008, students in our college can not only enjoy the national policy of grants and scholarships, that is, the annual living expenses of students in the first two years are10.5 million yuan, and 5% student scholarships are10.0 million yuan. Moreover, Hangzhou also stipulates that students registered in Hangzhou are exempt from paying tuition fees for the first two years. The Department of Automobile Maintenance Technology is mainly responsible for full-time professional teaching and part-time skill training of automobile maintenance. The specialties offered by Xi 'an are: automobile operation and maintenance (technician) and automobile inspection and maintenance (senior engineer), among which the specialty of automobile operation and maintenance is the national provincial training base and the specialty of automobile inspection and maintenance is the demonstration specialty of Zhejiang Province.
There are 63 full-time and part-time teachers, including 2 national technical experts in the transportation industry, 3 with senior title/kloc-0, 7 with intermediate title/kloc-0, 5438 with German motor vehicle technical service director 16, 2 with senior technician/kloc-0, and 3 with technician/kloc-0. Graduate students 1 1 person, 39 undergraduates. In 2009, two teachers won the first place in the national competition for core teachers of "Beijing Modern Class", won the first place in the third national automobile maintenance skill competition for teachers of transportation technical colleges in 20 10, and won the first place in the national teaching design competition for higher vocational groups of automobile maintenance in 2010/year. There are automobile maintenance skill training center, automobile maintenance engineering technology experiment center and automobile maintenance vocational education research center. Automobile plastic painting department originated from automotive sheet metal specialty and was established in 198 1. Renamed to major in automobile beauty and decoration, automotive sheet metal and painting, automotive sheet metal and painting, and automobile body repair. On 20 10, an automobile plastic painting department was set up separately from the original automobile department, which mainly taught three directions: body sheet metal repair, body painting, automobile beauty and decoration. The professional level includes three years of junior middle school workers, five years of senior workers, six years of technicians and three years of high school workers. Automotive sheet metal and Painting Specialty is the key supporting specialty of Zhejiang Brand Specialty and Automobile Body Repair Specialty in the National Model School of Secondary Vocational Education Reform and Development.
There are 23 teachers majoring in automotive sheet metal and Painting, including 3 teachers with senior titles/kloc-0 and 2 graduate students. National traffic technical expert 1 person, Zhejiang technical expert 3, Hangzhou technical expert 1 person, Hangzhou chief technician 1 person, and Hangzhou youth post expert 2. There are Pentium ARS Automobile Maintenance Training Center, a school-enterprise cooperation project of the Ministry of Education, SPANESI (Spanne Tin) Automobile Plastic Technology Professional Training Base of China Automobile Talents Training Engineering Committee, Pompeii Paint Oil Trading (Shanghai) Co., Ltd., Water-based Sheet Metal Spraying Joint Training Center and Spraying Joint Training Center. The total area of the training center is nearly 4,000 square meters, and the value of training equipment exceeds 2 1.83 million yuan. 1999 college offers courses related to automobile marketing, and in 2002, it set up automobile marketing specialty, and in August of October10, it set up business department, and now it offers automobile maintenance (business direction), automobile maintenance (reception direction), automobile maintenance (evaluation direction), automobile marketing, e-commerce and other specialties.
There are 27 full-time teachers in the Department of Commerce, including 4 senior titles, 5 senior technicians, 5 graduate students, 23 "double-qualified" teachers, and provincial professional leaders 1 person. The Department of Mechanical and Electrical Engineering was established in 2003. At present, there are three majors: numerical control technology application, mold design and manufacturing, electromechanical assembly and maintenance. CNC machining (CNC milling direction) is a provincial brand specialty, and CNC technology is a provincial training base.
There are 28 full-time teachers, 1 external enterprise experts, 3 senior lecturers, 2 senior technicians, 2 technicians 12, 4 teachers with master's degree, 22 "double-qualified" teachers, 6 examiners, 2 senior examiners and 6 part-time teachers. Teachers of this department presided over the completion of the provincial project 1 of "Teaching Practice and Research on Project Courses of Mechanical NC Machining Specialty", participated in the national and provincial projects 1, and published more than 40 papers in various journals and magazines at all levels.
There are 9 comprehensive learning stations for CNC lathes, CNC milling machines, common machine tools, turret milling machines, special machining, fitter, PLC, machine tool electrical and CNC machine tool maintenance, and 8 training rooms for drawing, measuring, electrician, electronics, electrician assembly, CNC simulation and professional computer rooms (UG, CAXA). Founded in 2003, the Foundation Department mainly undertakes the teaching tasks of humanities and social sciences, vocational foundation and skills development courses, as well as the teaching and research work and student management of corresponding disciplines.
* * * There are 52 full-time teachers, of whom 89% are teachers with senior titles and 29% are masters. There are Chinese teaching and research group, science teaching and research group, English teaching and research group, basic teaching and research group (including computer and moral education) and physical education teaching and research group.
It has 12 training rooms, including physics laboratory, chemistry laboratory, microcomputer laboratory, voice laboratory, core competence training room, bodybuilding training room, etc., and has professional physical education teaching venues such as storm court, gym, billiards room and table tennis room.