1. In the process of seamless repair, it is necessary to clean the dent of the car with a clean wet cloth first. After cleaning, you can repair the dent with a special glue gun. You need to preheat the glue gun before using it.
2. After preheating with a glue gun, it is necessary to select a gasket at a suitable depression, and then use a glue gun to evenly coat the sol on the gasket. When applying the sol, you must pay attention to quickly applying the sol.
3. After smearing, directly paste the gasket to the concave part of the car, then press it for about 3 ~ 10 minutes, then align it with a special tool, and after turning the nut all the time to make the concave part smooth, remove the nut, special tool and gasket. Finally, spray alcohol on the car depression to clean up the residual sol in the depression.
Brief introduction of seamless repair of automobile
The repair technology of seamless dent in automobile is based on mechanics, thermodynamics and optics. The whole process is purely manual physical repair, which will not cause secondary damage to the car body and retain the original appearance of the car paint. It usually takes 30-90 minutes to repair a dent by using the automobile dent repair technology, which makes up for the shortcoming that it takes 1-2 days to paint the body panel.
The repair price of automobile dents is generally determined according to automobile dents. The harder the dent, the higher the maintenance price. However, compared with body panel painting, this technology still has certain advantages in price. After all, the dent repair technology of this car can be a desire for car preservation.
The car dent repaired by the car dent repair technology will not change color and fade, and keep the car in its original state. Avoid a series of problems such as color difference caused by body panel painting! The repair tool for automobile dents is simple, easy to carry and has low requirements on the construction site. Can provide on-site service for car owners in the initial stage.
Open the market with your real technology. Automobile dent repair is a purely manual physical operation, which is green and pollution-free. But sheet metal and painting will discharge waste and pollute the environment. Automobile dent repair technology can not only repair iron body, but also perfectly repair aluminum body, changing the situation that aluminum body is only replaced but not repaired. Save a lot of money for car owners.